Device ssd0 failed to power up

duhengliang

v880，solaris 9 , 6塊硬盤，昨天斷電后搬了一下機器，今天開不了，出現(xiàn)Device ssd0 failed to power up錯誤，ok下用probe-scsi-all  一直bus fault循環(huán)，怎么辦？各位大俠幫幫忙！

秦風

Hi,PLS do some work as below:

1. in OK promapt
ok reset-all
2. when the reset is complate,the prompat will to OK,now you can run prob-scsi-all to check the system scsi hardware status
ok probe-scsi-all
3.if the hard disk has been verifyed is normal,you maybe run MAX POST to check the system hardware stauts.
ok setenv auto-boot? false
ok setenv diag-level max
ok setenv diag-switch? true
ok reset-all
4.when POST run is over,you can run "show-post-results" to check the repot of the POST
5.If there no problem ,then you can boot up server,if it's normal boot up ,so the problem has been resolved
6.if there have not the hardware error,but the system can not boot up, PLS check the / file system by CD-ROM