
平臺 論壇博客文庫

› 論壇 › 操作系統 › BSD › 用vga可以啟動X,但是其它驅動不行...

[FreeBSD] 用vga可以啟動X,但是其它驅動不行... [復制鏈接]

asnama

白手起家

論壇徽章:: 0

電梯直達

1樓 [收藏(0)] [報告]

發表于 2007-07-16 00:12 |只看該作者 |倒序?yàn)g覽

FreeBSD 6.2 /i386

硬件配置(Samsung R20):
Intel Core2 T5500
1G Ram (128M shared)
ATI Radeon Xpress 1250

Device里用vga可以啟動X,但是分辨率很低,然后如果用其他的Driver,就出錯(都是(EE) No devices detected.)

難不成是硬件問題?誰能幫幫忙

我已經把
device drm
device radeondrm
編譯進內核了

xorg.conf

Section "ServerLayout"
      Identifier    "Layout0"
      Screen    0  "Screen0" 0 0
      InputDevice "Keyboard0" "CoreKeyboard"
      InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
      Load  "type1"
      Load "freetype"
      #Load "xtt"
      Load  "extmod"
      #Load  "glx"
      Load  "dri"
      Load  "dbe"
      #Load  "record"
      #Load  "xtrap"
      #Load  "speedo"
EndSection
Section "InputDevice"
      Identifier  "Mouse0"
      Driver    "mouse"
      Option    "Protocol" "Auto"
      Option    "Emulate3Buttons"
      Option    "Device" "/dev/sysmouse"
EndSection
Section "InputDevice"
      Identifier  "Keyboard0"
      Driver    "kbd"
      Option    "XkbModel" "pc105"
      Option    "XkbLayout" "us"
EndSection
Section "Monitor"
      Identifier "Monitor0"
### Comment all HorizSync and VertSync values to use DDC:
      HorizSync 31.5 - 57.0
      VertRefresh  50.0 - 70.0
EndSection
Section "Device"
      Identifier  "Card0"
      Driver    "ati"
      #Driver    "radeon"
      #Driver    "vga"
      #Driver    "vesa"
EndSection
Section "Screen"
      Identifier "Screen0"
      Device    "Card0"
      Monitor "Monitor0"
      #DefaultDepth 24
      DefaultDepth 8

      SubSection "Display"
            Viewport 0 0
            Depth    8
            Modes "1280x800"
      EndSubSection
      SubSection "Display"
            Viewport 0 0
            Depth    24
            Modes "1280x800"
      EndSubSection
EndSection

Xorg.0.log

(II) Primary Device is: PCI 01:05:0
(II) ATI: Candidate "Device" section "Card0".
(WW) ATI: PCI Mach64 in slot 1:5:0 could not be detected!
(EE) No devices detected.

Fatal server error:
no screens found

[ 本帖最后由 asnama 于 2007-7-16 08:50 編輯 ]