關于linux as 4 u3下網絡老是掉

wwszadu

我的機子是hpbl25p 四個網口 已經安裝過psp包
我將eth0和eth2做了一個綁定，綁定的步驟如下：
To configure two network devices for channel bonding, perform the following:
1.        Create a bonding devices in /etc/modprobe.conf. For example:
alias bond0 bonding
options bonding miimon=100 mode=1
2.        This loads the bonding device with the bond0 interface name, as well as passes options to the bonding driver to configure it as an active-backup master device for the enslaved network interfaces.
3.        Edit the /etc/sysconfig/network-scripts/ifcfg-ethX configuration file for both eth0 and eth1 so that the files show identical contents. For example:
DEVICE=ethX
USERCTL=no
ONBOOT=yes
MASTER=bond0
SLAVE=yes
BOOTPROTO=none
4.        This will enslave ethX (replace X with the assigned number of the Ethernet devices) to the bond0 master device.
5.        Create a network script for the bonding device (for example, /etc/sysconfig/network-scripts/ifcfg-bond0), which would appear like the following example:
DEVICE=bond0
USERCTL=no
ONBOOT=yes
BROADCAST=192.168.1.255
NETWORK=192.168.1.0
NETMASK=255.255.255.0
GATEWAY=192.168.1.1
IPADDR=192.168.1.10
6.        Reboot the system for the changes to take effect

昨天晚上網絡還是好好的，今天早上去網絡就ping 不通了
運行一下service network restart 網絡也不通了
重起機器有時候網絡也會不通
重起機器的時候網絡并沒報什么錯誤，bond0也是被激活了的