FreeBSD ADSL(PPPoE)step by step[原創]

coderror

1.關于Modem
確定你的ADSL Modem己經接入Internet


2.配置內核
你不再需要為 PPPoE 配置你的內核。 如果netgraph支持的話，就無需進入內核built,ppp將會動態裝載

3.設置ppp.conf
下面以ppp.conf為例:

default:
  set log Phase tun command # you can add more detailed logging if you wish
  set ifaddr 10.0.0.1/0 10.0.0.2/0

name_of_service_provider:
  set device PPPoE:xl1 # replace xl1 with your Ethernet device
  set authname YOURLOGINNAME # replace YOURLOGINNAME
  set authkey YOURPASSWORD # replace YOURPASSWORD
  set dial
  set login
  add default HISADDR

4.運行ppp
必須是root，才能運行:

# ppp -ddial name_of_service_provider

5.引導ppp
把下列各項加放到 /etc/rc.conf文件中:

ppp_enable="YES"
ppp_mode="ddial"
ppp_nat="YES"   # if you want to enable nat for your local network, otherwise NO
ppp_profile="name_of_service_provider"


by coderror

[ 本帖最后由 rainren 于 2005-12-20 15:19 編輯 ]