freebsd5.4的pxe網絡安裝實例

yanyp

freebsd5.4的pxe網絡安裝
說明:dhcp,tftp,nfs必須要熟
server端為freebsd5.4
client  NIC要支持pxe啟動
參考文檔：http://matthew.3322.org/index.php?action=show&id=15
1.
cd  /usr/ports/net/isc-dhcp3-server
make install
cp /usr/local/etc/dhcpd.conf.sample /usr/local/etc/dhcpd.conf
vi /usr/local/etc/dhcpd.conf
ddns-update-style interim;
ignore client-updates;
allow booting ;
allow bootp ;
option broadcast-address 10.5.17.255;
option domain-name-servers 10.59.96.250;
option domain-name "abc.com";
option routers 10.5.17.254;
option subnet-mask 255.255.255.0;
server-name "pxe-gw";
server-identifier 10.5.17.141;
next-server 10.5.17.141;
default-lease-time -1;

subnet 10.5.17.0 netmask 255.255.255.0 {
range  dynamic-bootp 10.5.17.150 10.5.17.155;
option root-path "10.5.17.141:/usr/local/export/pxe";
filename "pxeboot";
}

2
cd /usr/ports/net/rsync
make install
mkdir -p /mnt/cdrom
mkdir -p /usr/local/export/freebsd5.4
ln -s  /usr/local/export/freebsd5.4  /usr/local/export/freebsd
mdconfig -a -t vnode -u 2 -f /opt/5.4-RELEASE-i386-disc1.iso
mount_cd9660 /dev/md2 /mnt/cdrom
rsync -avz  /mnt/cdrom/ /usr/local/export/freebsd5.4/
cd /usr/local/export/freebsd5.4/5.4-RELEASE
cp –R  *  ../
mdconfig -d -u2


3.
mkdir -p /usr/local/export/pxe/boot
cp -R  /usr/local/export/freebsd5.4/boot/*  /usr/local/export/pxe/boot/


4
rm -rf  /usr/local/export/pxe/boot/loader.rc
vi /usr/local/export/pxe/boot /loader.rc
echo Loading Kernel...
load /boot/kernel/kernel
load linux.ko
echo Loading mfsroot  
echo booting...
echo initializing h0h0magic
load -t mfs_root /boot/mfsroot
set vfs.root.mountfrom=ufs:/dev/md0c
echo  mfsroot
boot

5.修改/etc/inetd.conf
tftp    dgram   udp     wait    root    /usr/libexec/tftpd      tftpd -l -s /tftpboot
去掉tftp前面的#
6.
修改/etc/rc.conf,添加
rpc_statd_enable="YES"
portmap_enable="YES"
nfs_server_enable="YES"

7
mkdir /tftpboot
mkdir /mnt/floppy
mkdir -p /mnt/mfs
cp  /usr/local/export/freebsd/boot/pxeboot  /tftpboot/
cd  /usr/local/export/pxe/boot/
gunzip mfsroot.gz
mdconfig -a -t vnode -u 1 -f  /usr/local/export/pxe/boot/mfsroot
mount /dev/md1 /mnt/floppy
rsync -avzH /mnt/floppy/ /mnt/mfs
umount /mnt/floppy
mdconfig -d -u 1

cd /usr/local/export/pxe
dd if=/dev/zero of=mfsroot bs=1k count=25000
mdconfig -a -t vnode -f mfsroot -u0
disklabel -r -w md0 auto
newfs /dev/md0c
mount /dev/md0  /mnt/mfs

8
vi /etc/exports
/usr -alldirs -maproot=root –ro

9
cd /tftpboot/
cp -R  /usr/local/export/pxe/boot   ./


10
檢查方法:
netstat –an | more
看udp  67 and 69 端口開了沒有
還有可用
tcpdump  port  67
tcpdump  port  69
tcpdump  port  2049
查看整個啟動過程

11
啟動
/usr/local/sbin/dhcpd &
inetd &
以下幾步每次啟動時都要做
可將這幾步寫成腳本放在/usr/local/etc/rc.d/中
cd /usr/local/export/pxe
dd if=/dev/zero of=mfsroot bs=1k count=25000
mdconfig -a -t vnode -f mfsroot -u0
disklabel -r -w md0 auto
newfs /dev/md0c
mount /dev/md0  /mnt/mfs


12
client啟動后選nfs安裝:
安裝過程中會出現”This is disk #0,package perl-5.8.6_2 is on disk #1, Would you like to switch discs now”
不要管他，選no就可


中午沒休息寫的，困哦，比redhat的kickstart要麻煩些，晚上貼openbsd的pxe安裝

congli

好文.收藏先!

劍心通明

多謝樓主共享！

Lyphone

這就是FB的無盤嗎？？大家表笑偶，偶還是菜鳥。

zhifengxun

謝謝,好文章!頂一個

gofans

:em03如果是架設windows上的話，也是點兩個的事�。� 不過FB還要在網站下載個tftpboot包（不大記得在那里了）,全部做好�。� 就去要安裝的電腦上開電腦！ 網絡安裝就OK了�。�！ 我喜歡一切簡單化��！ 如果OpenBSD更簡單！！