哈兄請?jiān)龠M(jìn)來，mplayer-skins裝不上

memoza

>;>; Checksum OK for mplayer/default-1.7.tar.bz2.
>;>; Checksum OK for mplayer/AlienMind-1.0.tar.bz2.
>;>; Checksum OK for mplayer/avifile-1.5.tar.bz2.
>;>; Checksum OK for mplayer/BlueHeart-1.4.tar.bz2.
>;>; Checksum OK for mplayer/CornerMP-1.0.tar.bz2.
>;>; Checksum OK for mplayer/CornerMP-aqua-1.0.tar.bz2.
>;>; Checksum OK for mplayer/Cyrus-1.0.tar.bz2.
>;>; Checksum OK for mplayer/gnome-1.1.tar.bz2.
>;>; Checksum OK for mplayer/hayraphon-1.0.tar.bz2.
>;>; Checksum OK for mplayer/hwswskin-1.0.tar.bz2.
>;>; Checksum OK for mplayer/mentalic-1.1.tar.bz2.
>;>; Checksum OK for mplayer/MidnightLove-1.5.tar.bz2.
>;>; Checksum OK for mplayer/neutron-1.4.tar.bz2.
>;>; Checksum OK for mplayer/phony-1.0.tar.bz2.
>;>; Checksum OK for mplayer/plastic-1.1.1.tar.bz2.
>;>; Checksum OK for mplayer/proton-1.1.tar.bz2.
>;>; Checksum OK for mplayer/slim-1.0.tar.bz2.
>;>; Checksum OK for mplayer/trium-1.0.tar.bz2.
>;>; Checksum OK for mplayer/WindowsMediaPlayer6-1.2.tar.bz2.
>;>; Checksum OK for mplayer/xanim-1.5.tar.bz2.
>;>; Checksum OK for mplayer/xine-lcd-1.0.tar.bz2.
>;>; Checksum mismatch for mplayer/mini.tar.bz2.
Make sure the Makefile and distinfo file (/usr/ports/multimedia/mplayer-skins/distinfo)
are up to date.  If you are absolutely sure you want to override this
check, type "make NO_CHECKSUM=yes [other args]".
*** Error code 1

Stop in /usr/ports/multimedia/mplayer-skins.
*** Error code 1

Stop in /usr/ports/multimedia/mplayer-skins.
#

照老辦法：rm /usr/ports/distfiles/mplayer/mini.tar.bz2

再執行安裝，可是每次都出相同的錯誤，
可是我的ports才升級的呀。

把你的Makefile發給我吧：caac200@hotmail.com

statue

try to get mplayer/mini.tar.bz2 from another site?

哈蜜瓜

不選擇mini.tar.bz2的skin

memoza

[quote]原帖由 "statue"]try to get mplayer/mini.tar.bz2 from another site?[/quote 發表：


好，那我只有試用google搜索手工下載了。

不選擇mini.tar.bz2的skin

我每次選的是default，可還是出這個問題。

l63

make NO_CHECKSUM=yes；


我試過了；

quakelee

我曾經有段時間所有的skin都mismatch了，沒關系的，用樓上的方法就解決了

memoza

make NO_CHECKSUM=yes install clean
還是不行,郁悶。

# gmplayer
Using GNU internationalization
Original domain: messages
Original dirname: /usr/local/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale


MPlayer 0.90rc5-2.95.4 (C) 2000-2003 Arpad Gereoffy (看DOCS!)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
編譯實時CPU檢測 - 警告, 這不是最佳選擇! 如果你想獲得最佳的 表現, 加上--disable-runtime-cpudetection選項重新編譯mplayer
Reading config file /usr/local/share/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
[cfg] read config file: /root/.mplayer/gui.conf
Reading config file /root/.mplayer/gui.conf: No such file or directory
vo: X11 running at 800x600 with depth 24 and 32 bpp (":0.0" =>; local display)
Disabling DPMS
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 50 audio & 136 video codecs
font: can't open file: /root/.mplayer/font/font.desc
font: can't open file: /usr/local/share/mplayer/font/font.desc
Using usleep() timing
Can't open input config file /root/.mplayer/input.conf : No such file or directory
Input config file /usr/local/share/mplayer/input.conf parsed : 52 binds
SKIN dir 1: '/root/.mplayer/Skin'
SKIN dir 2: '/usr/local/share/mplayer/Skin'
[skin] file ( /usr/local/share/mplayer/Skin/default/skin ) not found.
找不到Skin( default ).
# mplayer
Using GNU internationalization
Original domain: messages
Original dirname: /usr/local/share/locale
Current domain: mplayer
Current dirname: /usr/local/share/locale


MPlayer 0.90rc5-2.95.4 (C) 2000-2003 Arpad Gereoffy (看DOCS!)

CPU: Advanced Micro Devices Athlon 4 PM Palomino/Athlon MP Multiprocessor/Athlon XP eXtreme Performance (Family: 6, Stepping: 2)
Detected cache-line size is 64 bytes
CPUflags:  MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 0 SSE2: 0
編譯實時CPU檢測 - 警告, 這不是最佳選擇! 如果你想獲得最佳的 表現, 加上--disable-runtime-cpudetection選項重新編譯mplayer
Reading config file /usr/local/share/mplayer/mplayer.conf: No such file or directory
Reading config file /root/.mplayer/config
Reading /root/.mplayer/codecs.conf: can't open '/root/.mplayer/codecs.conf': No such file or directory
Reading /usr/local/share/mplayer/codecs.conf: 50 audio & 136 video codecs
用法:   mplayer [options] [url|path/]filename

基本選項: (包括所有選項的詳細列表參見manpage!)
-vo <drv[]>; 選擇視頻輸出模式和設備(用'-vo help'查看列 表)
-ao <drv[]>; 選擇音頻輸出模式和設備(用'-ao help'查看列 表)
-vcd <trackno>;  從設備而不是普通文件上播放VCD(video cd)track
-dvd <titleno>;  從設備而不是普通文件上播放DVD title/track
-alang/-slang   選擇DVD音軌/字幕的語言(使用兩位的國家代碼)
-ss <timepos>;   尋找指定的(多少秒或hh:mm:ss)位置
-nosound        不播放聲音
-fs -vm -zoom   全屏播放選項(fullscr,vidmode chg,softw.scale)
-x <x>; -y <y>;   設置播放的分辨率(用于改變vidmode或軟件縮放)
-sub <file>;     指定使用的字幕文件(參見-subfps, -subdelay)
-playlist <file>; 指定使用播放列表文件
-vid x -aid y   選擇用于播放的視頻(x)和音頻(y)流
-fps x -srate y 改變視頻(x fps)和音頻(y Hz)率
-pp <quality>;   使用后期處理濾鏡(詳細內容參見manpage/docs)
-framedrop      使用 frame-dropping (用于慢機器)

基本控制鍵: (完整的列表參見manpage, 同時也要檢查一下 input.conf)
<-  or  ->;      向后/向前搜索10秒
up or down      向后/向前搜索1分鐘
pgup or pgdown  向后/向前搜索10分鐘
< or >;          跳到播放列表中的前一首/下一首
p or SPACE      暫停播放(按任意鍵繼續)
q or ESC        停止播放并推出
+ or -          調整音頻延遲+/-0.1秒
o               循環OSD模式:  none/seekbar/seekbar+timer
* or /          增加或減少pcm音量
z or x          調整字幕延遲+/-0.1秒
r or t          上/下調整字幕位置, 參見-vop expand !

* * * 詳細內容，進一步(高級)的選項和控制鍵參見MANPAGE！* * *

#

哈蜜瓜

別管它！不裝mplayer-skins ports也行！
把所有下載的skin包解壓到 /usr/local/share/mplayer/Skins/下再運行
gmplayer
圖形的GUI是否出來了？

jedi-k

mplayer不出界面的
用gmplayer就好了！

memoza

原帖由 "哈蜜瓜" 發表：
別管它！不裝mplayer-skins ports也行！
把所有下載的skin包解壓到 /usr/local/share/mplayer/Skins/下再運行
gmplayer
圖形的GUI是否出來了？

圖形出來了，可是出現亂碼，刪除中文字體，依舊是亂碼尺。
想想看，還有什么辦法。file:/root/snapshot1.png

這里怎么發圖片啊。