- 論壇徽章:
- 0
|
OpenVMS vax 模擬器
需要軟硬件:
window pc一臺.
winpcap: [url]http://winpcap.polito.it/install/bin/WinPcap_3_1_beta_3.exe
simh: http://simh.trailing-edge.com/sources/simhv32-3-exe-ether.zip
OpenVMS vax 5.x-7.x 安裝盤,由于SIMH不能使用光驅,因此b必須將光盤做成ISO.方法如下:
Select Recorder|Save Track
Select the track, set the output filename
In Options, you may need to set the Read Speed down;
the VMS Hobbyist CD didn't work after a 52x read, but worked fine at 8x
Click GO
一定要將光驅速度設定再8x以下.
VMS vax LICENSE 若干,我還沒申請到,有的朋友作個貢獻,順便給我一份:sean.ding@163.com
安裝過程:
1.安裝winpcap.
2.安裝SIMH,直接解壓就可以了.同時將做好的VMS.ISO copy到安裝目錄.
3.配置SIMH,再SIMH安裝目錄下建立VAX.INI文件,內容如下:
;----------------------------------------------------------------
; Load CPU microcode
load -r ka655.bin
;
; Attach non-volatile RAM to a file
attach nvr nvram.bin
;
; This virtual machine has 64M memory
set cpu 64m
;
; Define disk drive types. RA92 is largest-supported VAX drive.
set rq0 ra92
set rq1 ra92
set rq2 ra92
set rq3 cdrom
;
; Attach defined drives to local files
attach rq0 d0.dsk
attach rq1 d1.dsk
attach rq2 d2.dsk
;
; Attach the CD-ROM to its file (read-only)
attach -r rq3 vms62.iso
;
; Disable unused devices. It's also possible to disable individual devices,
; using a construction like "set rq2 disable" if desired.
;
set rl disable
set ts disable
;
; Attach Ethernet to a network interface
set xq mac=08-00-2B-AA-BB-CC
attach xq \Device\NPF_{608B11E9-A164-41F6-9649-3BD30434FC70}
;
; Now start the emulator
boot cpu
;-----------------------------------------------------------------------
4.運行VAX虛擬機,雙擊VAX.EXE.
VAX simulator V3.2-3
NVR: buffering file in memory
RQ: unit is read only
Eth: opened \Device\NPF_GenericNdisWanAdapter
Eth: Error Transmitting packet: No error
You may need to run as root, or install a libpcap version
which is at least 0.9 from www.tcpdump.org
[c
KA655-B V5.3, VMB 2.7
Performing normal system tests.
40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
08..07..06..05..04..03..
Tests completed.
>;>;>;
>;>;>;sh dev 看一下設備
>;>;>;boot dua3 從光驅(也就是你做的VMS.iso) 啟動.
.
.
.
Available device DUA0: device type RA92
Available device DUA1: device type RA92
Available device DUA2: device type RA92
Available device DUA3: device type RRD40
Enter "YES" when all needed devices are available: y
%BACKUP-I-IDENT, Stand-alone BACKUP T7.2; the date is 19-APR-2003 15:48:04.20
At this point, you're running a small "standalone" operating system that's used for backing
up and restoring data. Use the command that follows to restore the VMS "save set" from CD-
ROM to the first hard disk.
$ backup dua3:vms073.b/save_set dua0:
等backup完成后回到SIMH
sim>;boot cpu
>;>;>;set boot dua0
>;>;>;boot
按照提示安裝,具體安裝方法可以參考:http://www.wherry.com/gadgets/retrocomputing/vax-simh.html
好好享用吧.非常棒的操作系統,有些東西是UNIX望塵莫及的. |
|
免費注冊
發表于 2004-10-17 12:02
