{help} V880 不能啟動�。。�！

toperos

Rebooting with command: boot
Boot device: disk0  File and args:
SunOS Release 5.8 Version Generic_117000-03 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
NOTICE:
Emulex LightPulse FC SCSI/IP 6.00g
NOTICE: lpfc0: Firmware Rev 3.90A7 (C2D3.90A7)
NOTICE: lpfc0: WWPN:10:00:00:00:c9:3d:2b:4d WWNN:20:00:00:00:c9:3d:2b:4d DID 0x10000
NOTICE: lpfc1: Firmware Rev 3.90A7 (C2D3.90A7)
NOTICE: lpfc1: WWPN:10:00:00:00:c9:3d:2b:7f WWNN:20:00:00:00:c9:3d:2b:7f DID 0x10000
PowerPath:powermt set volume_open_policy=firstpath
Starting VxVM restore daemon...
VxVM starting in boot mode...
NOTICE: vxvm:vxdmp: added disk array DISKS, datype = Disk

configuring IPv4 interfaces: ce0 eri0 ge0.
Hostname: xxxxx

/sbin/rcS: /usr/bin/loadkeys: not found
/etc/rcS.d/S35vxvm-startup1: /usr/lib/vxvm/voladm.d/lib/vxadm_lib.sh: not found
/sbin/swapadd: expr: not found
swapadd: file system table (/etc/vfstab) not found

WARNING - /usr/sbin/fsck not found.  Most likely the
mount of /usr failed or the /usr filesystem is badly
damaged.  The system is being halted.  Either reinstall
the system or boot with the -b option in an attempt
to recover.

SUNW,pci-gem0: Using Gigabit SERDES Interface
SUNW,pci-gem0: Auto-Negotiated 1000 Mbps Full-Duplex Link Up
syncing file systems... done
Program terminated
{1} ok
  現在用光盤引導已經不能mount上根區。
#boot cdrom -s
INIT: SINGLE USER MODE
# mount /dev/dsk/c1t0d0s0 /mnt
mount: the state of /dev/dsk/c1t0d0s0 is not okay
        and it was attempted to be mounted read/write
mount: Please run fsck and try again



各位老大幫忙看看，謝謝！��！

toperos

大家有何高見，急！�。。。。。。。。。。。。。。。�

麻煩人

已經提示你用fsck修復文件系統了

toperos

fsck也沒有用的。系統里的fsck已經丟失。用光盤上的
＃fsck -y  /dev/dsk/c1t0d0s0
也沒有用的。

steellyz

也許你的文件系統沒有壞，我也碰到過和你一樣的現象，你只要強行將/usr分區mount上去，然后再做你想做的操作。可靠一點的話，最后還是要做一下fsck的。強行mount的命令是：
mount –o rw /dev/dsk/c1t0d0s0 /mnt

abcU

檢查VFSTAB

toperos

現在發現vfstab的確有問題。正在解決中。。。。。。。。。。。。。