- 論壇徽章:
- 2
|
本帖最后由 crazyboytan 于 2016-03-22 22:28 編輯
我用的是VBOX創建的一虛擬機，安裝了RHEL6.3，剛開始只有一橋接類型的網卡，后來又添加了一內部類型的網卡，但我的第二張網卡不管怎么設置，它的IP地址依然和第一張網卡的IP地址一樣，相關配置信息如下：
[root@web1 network-scripts]# cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x8086:0x100e (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:c7:c1:87", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x8086:0x100e (e1000)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="08:00:27:6c:3f:96", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
[root@web1 network-scripts]#
[root@web1 network-scripts]#
[root@web1 network-scripts]#
[root@web1 network-scripts]#
[root@web1 network-scripts]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 08:00:27:C7:C1:87
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fec7:c187/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1473 errors:0 dropped:0 overruns:0 frame:0
TX packets:593 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:146529 (143.0 KiB) TX bytes:75150 (73.3 KiB)
eth1 Link encap:Ethernet HWaddr 08:00:27:6C:3F:96
inet addr:192.168.1.11 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe6c:3f96/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4250 (4.1 KiB) TX bytes:8593 (8.3 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:720 (720.0 b) TX bytes:720 (720.0 b)
[root@web1 network-scripts]#
[root@web1 network-scripts]#
[root@web1 network-scripts]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROTO=static
BROADCAST=10.255.255.255
IPADDR=10.1.1.1
NETMASK=255.0.0.0
NETWORK=10.0.0.0
ONBOOT=yes
[root@web1 network-scripts]#
上面兩張網卡的IP地址居然是一樣的，我想知道是不是除了上面幾個文件之外是否還需要修改其他的配置文件？求知道的兄弟指點！謝謝！ |
|
免費注冊
發表于 2016-03-22 22:24
