我這里的squid3啟動里，有一個ERROR，可是我谷歌了好多，還是解決不了？！

百分百好牛

主要就是690-691行的錯誤
690 2015/12/28 19:20:20| commBind: Cannot bind socket FD 16 to [::1]: (99) Cannot assign requested address

我百度谷歌了一下，這樣的錯誤很少。貌似是某端口被占用或者無法打開�？墒俏襭s aux | grep squid3, netstat -ntlp | grep squid3 都看得到squid3的進程，而且，端口也是他打開的！
不過lsof -i:8002，沒有任何內容（我的lsof -i:22，也沒有任何內容，我是用putty遠程連接到服務器的）

我研究了一下，我發現網絡上別人的錯誤，至少 to 后面都是有實際的IP地址的，為什么我這里 FD 16 to [::1]: 是這個樣子的？
我懷疑是不是我哪里配置錯誤了？

大家?guī)蛶头治鲆幌�，謝謝了！


LOG片斷如下：
685 2015/12/28 19:20:20| Rebuilding storage in /var/spool/squid3 (dirty log)
686 2015/12/28 19:20:20| Using Least Load store dir selection
687 2015/12/28 19:20:20| Set Current Directory to /var/spool/squid3
688 2015/12/28 19:20:20| Loaded Icons.
689 2015/12/28 19:20:20| HTCP Disabled.
690 2015/12/28 19:20:20| commBind: Cannot bind socket FD 16 to [::1]: (99) Cannot assign requested address
691 2015/12/28 19:20:20| commBind: Cannot bind socket FD 17 to [::1]: (99) Cannot assign requested address
692 2015/12/28 19:20:20| ERROR: Failed to create helper child read FD: UDP[::1]
693 2015/12/28 19:20:20| Squid plugin modules loaded: 0
694 2015/12/28 19:20:20| Adaptation support is off.
695 2015/12/28 19:20:20| Accepting HTTP Socket connections at local=0.0.0.0:8002 remote=[::] FD 15 flags=9
696 2015/12/28 19:20:20| Done reading /var/spool/squid3 swaplog (0 entries)
697 2015/12/28 19:20:20| Store rebuilding is 0.00% complete
698 2015/12/28 19:20:20| Finished rebuilding storage from disk.
699 2015/12/28 19:20:20|         0 Entries scanned
700 2015/12/28 19:20:20|         0 Invalid entries.
701 2015/12/28 19:20:20|         0 With invalid flags.
702 2015/12/28 19:20:20|         0 Objects loaded.
703 2015/12/28 19:20:20|         0 Objects expired.
704 2015/12/28 19:20:20|         0 Objects cancelled.
705 2015/12/28 19:20:20|         0 Duplicate URLs purged.
706 2015/12/28 19:20:20|         0 Swapfile clashes avoided.
707 2015/12/28 19:20:20|   Took 0.07 seconds (  0.00 objects/sec).
708 2015/12/28 19:20:20| Beginning Validation Procedure
709 2015/12/28 19:20:20|   Completed Validation Procedure
710 2015/12/28 19:20:20|   Validated 0 Entries
711 2015/12/28 19:20:20|   store_swap_size = 0.00 KB
712 2015/12/28 19:20:20| storeLateRelease: released 0 objects

csoho2000

::1  這個是lo IPv6的回環地址，

在配置文件是是不是要指定IP之類的