我的Cisco 2800 為什么不能telnet？

zdm

我的Cisco 2800 為什么不能telnet？到底我哪里配置錯誤了？
IWT#show run
Building configuration...

Current configuration : 2847 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname IWT
!
boot-start-marker
boot-end-marker
!
logging buffered 51200 warnings
enable password 123456
!
no aaa new-model
!
resource policy
!
ip subnet-zero
!
!
ip cef
!
!
no ip domain lookup
ip domain name yourdomain.com
!
username cisco privilege 15 secret 5 $1$Fzio$6sehMh9i/SM8E4vw8xx6x/
!
!
!
interface GigabitEthernet0/0
description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
ip address 192.168.1.1 255.255.255.252
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 192.168.2.1 255.255.255.0
duplex auto
speed auto
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.1.2
ip route 192.168.0.0 255.255.0.0 192.168.2.2
!
ip http server
ip http access-class 23
ip http authentication local
ip http timeout-policy idle 60 life 86400 requests 10000
!
!
control-plane
!
banner exec ^C
% Password expiration warning.
-----------------------------------------------------------------------

Cisco Router and Security Device Manager (SDM) is installed on this device and
it provides the default username "cisco" for  one-time use. If you have already
used the username "cisco" to login to the router and your IOS image supports the
"one-time" user option, then this username has already expired. You will not be
able to login to the router with this username after you exit this session.

It is strongly suggested that you create a new username with a privilege level
of 15 using the following command.

username <myuser> privilege 15 secret 0 <mypassword>

Replace <myuser> and <mypassword> with the username and password you want to
use.

-----------------------------------------------------------------------
^C
banner login ^C
-----------------------------------------------------------------------
Cisco Router and Security Device Manager (SDM) is installed on this device.
This feature requires the one-time use of the username "cisco"
with the password "cisco". The default username and password have a privilege level of 15.

Please change these publicly known initial credentials using SDM or the IOS CLI.
Here are the Cisco IOS commands.

username <myuser>  privilege 15 secret 0 <mypassword>
no username cisco

Replace <myuser> and <mypassword> with the username and password you want to use.

For more information about SDM please follow the instructions in the QUICK START
GUIDE for your router or go to http://www.cisco.com/go/sdm
-----------------------------------------------------------------------
^C
!
line con 0
logging synchronous
login
line aux 0
line vty 0 4
password 123456
login
transport input telnet
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet
!
scheduler allocate 20000 1000
!
end

zdm

有人知道嗎？我到底哪里配置錯誤了？

quxiaosong

提示什么錯誤？在該設備telnet自己試試

zdm

輸入密碼回車后還是顯示password：
說明輸入的密碼不對，但是密碼是絕對沒有問題的，因?yàn)樵O(shè)備在機房，我不方便過去在機器上測試，請問我該怎么判斷？

xiaomabetter

級別設置高一點

zdm

privilege level 15
是這樣嗎？