- 論壇徽章:
- 0
|
回復 3# 東方蜘蛛
謝謝蜘蛛大俠，我是準備來監控這臺SL500，這臺機器已經出保了，以前維護的人沒有留下任何文檔，甲方不知道IP，不知道密碼。
我查了oracle metalink ,里面的說法是
Load 1011 or later code per procedure below, then in step 3 login as “advsrv”, “service”, or “OEM”,
depending on what passwords are known, and enter the CLI “resetpw all” command. The advsrv password
can be obtained from the area tech specialist. New activation passwords for service, OEM, and admin will be
required.
Goal
SL500 - How to Reset OEM, Service, Admin, or Op Panel Passwords on Library
Fix
Passwords cannot be reset by the customer via the SL Console!
Steps to Follow
Reset Admin, Service or OEM password:
resetpw
• Places the specified login password back to the -needs activated- state. This is used to recover forgotten passwords.
..............
•Starting with code release 1011 in the SL500 you can reset passwords for roles: admin, oem, and service.
•Starting with this code release 1011 you no longer erase all passwords when you load or reload this level or higher.
Note: This function does not work for Advance Service Password, it is not field resetable.
Note: The customer can change the admin password from SLConsole but they can't reset it if they forgot their password. If they forgot their password only a CSE can reset it from the CLI port.
Prerequisites:
•Code 1011 or higher
•You must be in the CLI port
•you must have activated a password
Syntax:
advsrv >> help resetpw
resetpw | | |
Places the specified login password back to the -needs activated-
state. This is used to recover forgotten passwords.
Note - For this example we were in advsrv. But you could also be in oem or service log in.
Example -
- oem resetpw all
- oem resetpw oem
- oem resetpw service
- oem resetpw admin
or
- service resetpw admin
- service resetpw service
- service resetpw oem
- service resetpw all
When this is done, it will take you back to password activation request on the next log in of the reset role.
The CSE will need to down load a new One Time Password from the Oracle Internal website.
Operator Panel Reset:
Note: The customer can change the admin password from SLConsole but the customer cannot reset the admin password if it is forgotten. If they forgot their password only a CSE can reset it from the CLI port.
When using "resetpw oppanel", once the command has been given, all you need to do is hit "Enter" on the Op Panel and then it will ask you to enter a new admin password.
文檔我讀了好幾遍，激活碼（ activated a password）這個東東在哪里？還是必須通過原廠才能拿到？
|
|
免費注冊
發表于 2013-01-16 00:03
