如何對CISCO交換機進行SNMP管理

lrxiang

我們單位有幾臺CISCO2950、2924的交換機，我也搞到一套SNMP軟件，但是不知道要對CISCO交換機進行SNMP管理，在交換機上需要進行哪些設置？有什么需要注意的地方？

xliu

要開啟SNMP服務，別的好像沒有什么要設置的。

Lambent

Assign a management VLAN, let\'s say VLAN 1\r\n\r\nassign an IP address on interface VLAN1\r\n\r\n!\r\ninterface VLAN 1\r\n ip address 10.0.0.1 255.255.255.0\r\n!\r\n\r\nAssuming your SNMP server is in the same management VLAN, assign an IP address for your server, let\'s say 10.0.0.100/24\r\n\r\nthen on the switch, use the following commands to turn on SNMP (assuming the read-only and read/write community strings on both the switch and the server are ABC and DEF respectively):\r\n\r\n!\r\nsnmp-server community ABC ro\r\nsnmp-server community DEF rw\r\nsnmp-server trap-source VLAN 1\r\nsnmp-server location yourlocation\r\nsnmp-server chassis-id routerhostname\r\nsnmp-server enable traps\r\nsnmp-server host 10.0.0.100 DEF snmp\r\n!\r\n\r\n\r\nI cannot type chinese, sorry about that.