做完POST后沒有明顯報錯，但是有Board Descriptor (%o2): ffdfffff0bd11111

glfeng

hi，all\r\n \r\n今天我給E450檢測，跟換備件，CPU FAN 和 DISK FAN，做POST時，有如下輸出，請問是哪里有問題，謝謝\r\n\r\nNetwork Link Setup Failed. \r\nPlease Check Cable and Try Again. \r\nTimeout waiting for ARP/RARP packet\r\nSetting up Network Link and Speed. \r\nUsing Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\nTimeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\nTimeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\nAutoNegotiation Timeout. \r\nCheck Cable or Contact your System Administrator. \r\nLink Down.\r\nNetwork Link Setup Failed. \r\nPlease Check Cable and Try Again. \r\nSetting up Network Link and Speed. \r\nUsing Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\nTimeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\nTimeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\nAutoNegotiation Timeout. \r\nCheck Cable or Contact your System Administrator. \r\nLink Down.\r\nNetwork Link Setup Failed. \r\nPlease Check Cable and Try Again. \r\nTimeout waiting for ARP/RARP packet\r\nSetting up Network Link and Speed. \r\nUsing Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated. \r\nTimeout reading Link status. Check cable and try again. \r\n\r\n{1} ok \r\n{1} ok \r\n{1} ok show-post-results\r\nPower On Selftest not run on last reset\r\nPersistent/saved POST results are: \r\nStatus 0=Pass, Non-Zero=Fail (%o0): 0 \r\nMessage String               (%o1): \r\nBoard Descriptor             (%o2): ffdfffff0bd11111 \r\n{1} ok

Snowict

從信息中沒有看到明顯的錯誤報告。 請先修改EEPROM參數(shù)再POST 機器。\r\ndiag-switch? true\r\nauto-boot? false\r\ndiag-level? max\r\n\r\npower-recycle the E450

glfeng

prom 幾個參數(shù)我都該了，而且POST4，5遍都不行，是主辦有問題么？

nimysun

tatus 0=Pass, Non-Zero=Fail (%o0): 0 \r\n\r\n返回值為0吧，\r\n你的硬件沒有什么問題吧。