- 論壇徽章:
- 0
|
一臺rx2600在啟動的時候出現如下報錯 ，無法進入系統
This boot experienced the following problems:
ERROR[55]: Invalid or inaccessible system ID(s)
The boot will halt at the Boot Manager.
Do not attempt to boot an O/S before fixing the error(s).
Press [Space] to continue... (seconds=01)
Copyright (c) 2000-2002 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7
Loading \'FPSWA\'...
Loading \'lsi1030\'...
Loading \'gigundi\'...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager
Scsi(Pun0,Lun0) HP 73.4GST373453LC HPC8Cannot determine device capacity
Scsi(Pun0,Lun0) HP 73.4GST373453LC HPC8
ERROR: Cannot initialize SCSI Device
Scsi(Pun1,Lun0) HP 146 GST3146807LC HPC8Cannot determine device capacity
Scsi(Pun1,Lun0) HP 146 GST3146807LC HPC8
ERROR: Cannot initialize SCSI Device
Scsi(Pun0,Lun0) HP 36.4GMAN3367MC HP05 ( 40 MBytes/sec)
Scsi(Pun2,Lun0) HP 146 GST3146807LC HPC8 ( 40 MBytes/sec)
Broadcom NetXtreme Gigabit Ethernet Adapter is detected (PCI)
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.21 [4334]
Stop Boot condition detected. Only EFI shell can be started
Loading device drivers
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.21 [4334]
Stop Boot condition detected. Only EFI shell can be started
Please select a boot option
Use ^ and v to change option(s). Use Enter to select an option
Use ^ and v to change option(s). Use Enter to select an option
Stop Boot condition detected !!
Only EFI shell or approved diagnostic can be started
MP卡vfp的輸出如下 ：
Status | Running non-OS code. (i.e. Boot or Diagnostics)
-----------------------------------------------------------------------------
LEDs | LOCATOR | SYSTEM | POWER
-----------------------------------------------------------------------------
| OFF | FLASH YELLOW | ON GREEN
-----------------------------------------------------------------------------
Status | Running non-OS code. Non-critical error detected.
| Check System Event Log (SL) for error messages.
| Reading System Event Log will turn off the Attention LED.
在EFI下看到的I/O INFORMATION
I/O INFORMATION
BOOTABLE DEVICES
Order Media Type Path
----- ---------- ---------------------------------------
Press ENTER to continue, \'q\' to exit:
ERROR: Cannot initialize SCSI Device代表什么意思呢？ 系統識別不到啟動盤了嗎？
Running non-OS code.又是什么意思呢 ？
為什么I/O INFORMATION下沒有可啟動的設備呢？
第一次接觸安騰的機器，EFI界面就更不熟了。
企望各位大俠指點一二。 |
|
免費注冊
發表于 2008-05-10 23:24
