ignite安裝問題

duanwenwen_850

在hp官網下載了Ignite包。
然后運行 swinstall
分析的時候出現錯誤，請高手們幫我，謝謝了，急在線等：

=======  2008?ê4??2è? D??úèy 16:51:51 EAT  BEGIN install AGENT SESSION
         (pid=27031)

       * Agent session started for user \"root@dxcos\". (pid=27031)

       * Beginning Analysis Phase.
       * Source:
         dxcos:/home/lgl/Ignite-UX-11-ALL_C.7.5.142.depot
       * Target:           dxcos:/usr/hcy/Ignite
       * Target logfile:   dxcos:/usr/hcy/Ignite/var/adm/sw/swagent.log
       * Reading source for product information.
NOTE:    The command \"/sbin/mount\" exited with a status code of \"1\".
         The following is the output from the command:
         /dev/dsk/c0t0d0: I/O error
NOTE:    End of command output. Non-zero exit status may or may not be
         a failure. Look for additional messages.
ERROR:   Entry for filesystem \"/dev/dsk/c0t0d0\" in \"/etc/fstab\" could
         not be mounted.  If you do not want this file system mounted,
         comment it out of the \"/etc/fstab\" file, or set the
         \"mount_all_filesystems\" option to \"false\".
ERROR:   Cannot continue the Analysis Phase until the previous errors
         are corrected.

duanwenwen_850

在網上查了解決辦法

swinstall 界面的option下面取消一項叫\(zhòng)"mount filesystems in /etc/fstab or /etc/checklist\"的就可以了

在命令里面 參數 -x mount_all_filesystems false,將 mount_all_filesystems的參數射程false。。好像是-x。。

wangy980301

你為什么不把執(zhí)行的命令部分給貼出來，然我們猜嗎？

wuzi1006

swinstall -s +路徑
直接執(zhí)行swinstall是會報錯的