
平臺論壇博客文庫

› 論壇 › 備份版區 › 虛擬化技術交流 › 兩臺機器用heartbea做tHA問題？？？

兩臺機器用heartbea做tHA問題？？？ [復制鏈接]

newunixlearner

白手起家

論壇徽章:: 0

電梯直達

1樓 [收藏(0)] [報告]

發表于 2006-08-22 20:04 |只看該作者 |倒序瀏覽

操作系統為FC 5
兩臺機器都按照網上的資料配好了，但是啟動時候發現兩臺都是active的？正確嗎？按照常理應該是一臺active，另一臺是standby才對啊，不知道有沒有高人能夠給點一下，兩臺機器配置文件配置的都一樣嗎？剛開始是系統怎么判斷誰是active，誰是standby的？
配置文件無非就是 /etc/ha.d/haresoures  ha.cf  ldirectord.cf 和 autheys這四個，可就是感覺不正常，搞暈了！
[root@fc5ha1 ha.d]# ifconfig
eth2    Link encap:Ethernet  HWaddr 00:16:35:C4:CE:74
      inet addr:10.17.34.128  Bcast:10.17.34.255  Mask:255.255.255.0
      inet6 addr: fe80::216:35ff:fec4:ce74/64 Scope:Link
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      RX packets:11183 errors:0 dropped:0 overruns:0 frame:0
      TX packets:3345 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:2929148 (2.7 MiB)  TX bytes:590143 (576.3 KiB)
      Interrupt:19

eth2:0 Link encap:Ethernet  HWaddr 00:16:35:C4:CE:74
      inet addr:10.17.34.117  Bcast:10.17.34.255  Mask:255.255.255.0
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      Interrupt:19

lo       Link encap:Local Loopback
      inet addr:127.0.0.1  Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING  MTU:16436  Metric:1
      RX packets:1015 errors:0 dropped:0 overruns:0 frame:0
      TX packets:1015 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:52919 (51.6 KiB)  TX bytes:52919 (51.6 KiB)
另一臺：

[root@fc5ha2 new]# ifconfig
eth2    Link encap:Ethernet  HWaddr 00:16:35:C2

2:B3
      inet addr:10.17.34.198  Bcast:10.17.34.255  Mask:255.255.255.0
      inet6 addr: fe80::216:35ff:fec2:d2b3/64 Scope:Link
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      RX packets:387270 errors:0 dropped:0 overruns:0 frame:0
      TX packets:25949 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:68323087 (65.1 MiB)  TX bytes:3844589 (3.6 MiB)
      Interrupt:19

eth2:0 Link encap:Ethernet  HWaddr 00:16:35:C2

2:B3
      inet addr:10.17.34.117  Bcast:10.17.34.255  Mask:255.255.255.0
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      Interrupt:19

lo       Link encap:Local Loopback
      inet addr:127.0.0.1  Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING  MTU:16436  Metric:1
      RX packets:10136 errors:0 dropped:0 overruns:0 frame:0
      TX packets:10136 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:508831 (496.9 KiB)  TX bytes:508831 (496.9 KiB)
兩者eth2：0都起了，是不是意味著都是active的？
用 service heartbeat stop命令后結果如下：

[root@fc5ha2 new]# ifconfig
eth2    Link encap:Ethernet  HWaddr 00:16:35:C2

2:B3
      inet addr:10.17.34.198  Bcast:10.17.34.255  Mask:255.255.255.0
      inet6 addr: fe80::216:35ff:fec2:d2b3/64 Scope:Link
      UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
      RX packets:392377 errors:0 dropped:0 overruns:0 frame:0
      TX packets:26871 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:1000
      RX bytes:69639596 (66.4 MiB)  TX bytes:3964632 (3.7 MiB)
      Interrupt:19

lo       Link encap:Local Loopback
      inet addr:127.0.0.1  Mask:255.0.0.0
      inet6 addr: ::1/128 Scope:Host
      UP LOOPBACK RUNNING  MTU:16436  Metric:1
      RX packets:10654 errors:0 dropped:0 overruns:0 frame:0
      TX packets:10654 errors:0 dropped:0 overruns:0 carrier:0
      collisions:0 txqueuelen:0
      RX bytes:534731 (522.1 KiB)  TX bytes:534731

正常嗎？