MT4300CE 啟動文件

gadfly0217

/etc/inittab

#

# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>

#

# Note: BusyBox init doesn't support runlevels. The runlevels field is

# completely ignored by BusyBox init. If you want runlevels, use

# sysvinit.

#

# Format for each entry: <id>:<runlevels>:<action>:<process>

#

# id == tty to run on, or empty for /dev/console

# runlevels == ignored

# action == one of sysinit, respawn, askfirst, wait, and once

# process == program to run

# Startup the system

::sysinit:/bin/mount -o remount,rw /

::sysinit:/bin/mount -t proc proc /proc

::sysinit:/bin/mount -a

::sysinit:/bin/hostname -F /etc/hostname

::sysinit:/sbin/ifconfig lo 127.0.0.1 up

::sysinit:/sbin/route add -net 127.0.0.0 netmask 255.0.0.0 lo

# now run any rc scripts

::sysinit:/etc/init.d/rcS

# Set up a couple of getty's

#tty1::respawn:/sbin/getty 38400 tty1

#tty2::respawn:/sbin/getty 38400 tty2

# Put a getty on the serial port

#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100     /*關串口1，打開后應該可以用串口調試了*/

#ttyS0::respawn:-/bin/sh

# Logging junk

#null::sysinit:/bin/touch /var/log/messages

#null::respawn:/sbin/syslogd -n -m 0

#null::respawn:/sbin/klogd -n

#tty3::respawn:/usr/bin/tail -f /var/log/messages

# Stuff to do for the 3-finger salute

#::ctrlaltdel:/sbin/reboot

# Stuff to do before rebooting

#null::shutdown:/usr/bin/killall klogd

#null::shutdown:/usr/bin/killall syslogd

#null::shutdown:/bin/umount -a -r

#null::shutdown:/sbin/swapoff -a

/etc/init.d/rcS

#!/bin/sh

# Start all init scripts in /etc/init.d

# executing them in numerical order.

#

for i in /etc/init.d/S??* ;do

# Ignore dangling symlinks (if any).

[ ! -f "$i" ] && continue

case "$i" in

*.sh)

# Source shell script for speed.

(

trap - INT QUIT TSTP

set start

. $i
）

;;

*)

# No sh extension, so fork subprocess.

$i start

;;

esac

done

insmod /home/g_serial.o

/usr/sbin/telnetd -l /bin/sh

cd /home

mv servo.bak servo

./servo