A1000 做raid時出錯，各位幫我解決一下吧！

solaris_unix

我有一臺A1000連在Blade2000上，A1000上是4塊盤，Blade2000是solaris9，推薦補丁也打了，還打了 112233－12，113033－04，113277－22這幾個補丁，但是在做raid 5 時，機器重啟了，然后就報出這個錯誤，不知道時怎么回事，麻煩大家?guī)臀医鉀Q一下，謝謝��！Sun Blade 2000/1000 (UltraSPARC-III+) , No Keyboard
Copyright 1998-2004 Sun Microsystems, Inc.  All rights reserved.
OpenBoot 4.13.0, 4096 MB memory installed, Serial #57191419.
Ethernet address 0:3:ba:68:ab:fb, Host ID: 8368abfb.



Rebooting with command: boot -r                                       
Boot device: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@1,0  File and args: -r
SunOS Release 5.9 Version Generic_112233-12 64-bit
Copyright 1983-2003 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
configuring IPv4 interfaces: eri0.
Hostname: Blade2000
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
Re-generating rdriver.conf file ...
Configuring the RAID devices
The system is coming up.  Please wait.
checking ufs filesystems
/dev/rdsk/c1t1d0s6: is clean.
/dev/rdsk/c1t1d0s5: is clean.
/dev/rdsk/c1t1d0s7: is clean.
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway Blade2000
syslog service starting.
The NVSRAM settings of controller c4t5d0(1T94516042) are correct.

nvutil command succeeded.


fwutil succeeded!
Array Monitor initiated
RDAC daemons initiated
Jul  7 09:32:43 Blade2000 rdriver: ID[RAIDarray.rdaemon.1001] RDAC Resolution Daemon locked in memory
Jul  7 09:32:43 Blade2000 raid: AEN event Host=Blade2000 Ctrl=1T94516042 Dev=c4t5d0
Jul  7 09:32:43 Blade2000 raid:   ASC=A0 ASCQ=00 FRU=00 LUN=00 LUN Stat=00
Jul  7 09:32:43 Blade2000 raid:   Sense=700006000000009800000000A0000000000000000000000000000000000000000000800000082C000000000000000000000000000B05315439343531363034322020202020200301040000000000000000000000000000000000000000000000000000000005000000000000000000000000000000000000000000000000000000000000000000000000009B3037303730342F30323335303200000000000000
Jul  7 09:32:43 Blade2000 sendmail[1283]: My unqualified host name (Blade2000) unknown; sleeping for retry
volume management starting.
The system is ready.

Blade2000 console login:

chim

這個是正常的， 沒有錯誤！

報錯的是sendmail, 好像raid daemon 啟動后會發個mail 給root。你的sendmail 配置有問題而已，但raid 工作正常.

solaris_unix

sendmail 該怎么設置呢？還有，原來4x36G的硬盤，做完raid 5后，硬盤容量應該是多大呢？

nimysun

那就是36X(4-1)＝108GB嘍。

solaris_unix

知道了，謝謝�。�

chim

4x36G的硬盤, 硬盤容量:  36G x3= 108G

但做完分區格式化，實際你可使用的空間大慨有100G 左右。

Sendmai 的配置同你的機器的DNS配置有關。 如果不使用email server 那部分，我建議你不用理它。。。 小小錯誤沒有關系的哪！

infocos

在/etc/hosts里加一個  xyz.net