求助SUN V880的報錯的解決方法

霹將912

SUN V880在進行串口檢測能正常去到OK正常狀態下，probe-scsi能認到硬盤，然后進行boot cdrom -s去到輸入FORMAT就認不到硬盤了
提示# SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in

整個過程如下：
{2} ok probe-scsi
LiD HA LUN  --- Port WWN ---  ----- Disk description -----
0   0   0  500000e010b75511  FUJITSU MAP3735F SUN72G 1501
6   6   0  5080020000180411  SUNW    SUNWGS INT FCBPL922A
{2} ok boot cdrom -s
Boot device: /pci@8,700000/scsi@1/disk@6,0:f  File and args: -s
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc.  All rights reserved.
Use is subject to license terms.
WARNING: pcisch1: ino 0x4 blocked鼴ooting to milestone "milestone/single-user:default".
WARNING: pcisch1:pci@8,600000: ib_intr_dist(29ebf9bf020,204) timeout
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface eri0...
Skipped interface eri0
Attempting to configure interface ge0...
SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in.
Skipped interface ge0
Requesting System Maintenance Mode
SINGLE USER MODE
# format
Searching for disks...done
No disks found!

# SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in.

taojie2000

回復 1# 霹將912


    WARNING: pcisch1:pci@8,600000: ib_intr_dist(29ebf9bf020,204) timeout     這是重點   搜搜

wenyy_unix

硬盤的指示燈正常嗎？

goldfishway

硬盤指示燈正常

unix5188

硬盤背板到主板的上的線可能有問題了，最近還是拆過機器的話，那就有可能是松動了。實在不行報case讓oracle的工程師去現場測試把，

easybegin

用最簡配置，拔掉所有pci卡。

easybegin

用最簡配置，拔掉所有pci卡。

goldfishway

一共是5臺V880 的機器

其中2臺是由擴展硬盤柜子的 就是可以上12個硬盤的

客戶需要 2臺

把12個硬盤籠子跟6個硬盤籠子對調 原來12個硬盤位的機器就報上面的錯誤,用排除法,把主辦 io班 cpu班個呢更換到好的機器測試,最后發現是硬盤籠子安裝的問題.明確點,可能是籠子未裝好線,或者籠子壞了.