大家?guī)兔�看看為什么鼠�?biāo)沒反應了

mypromise

啟動系統后,如果一直沒有操作, 鼠標就會突然間沒有反應了, 不再響應,
顯示信息為

Message from syslogd @host at Sat jun 21 9:28 2008
host kernel: disable irq 217


但沒看到log里面有什么東西, 大家?guī)兔�看�?怎么解決這個問題?
多謝了

cnjnhu

One suggestion in amongst that lot was "[17179578.592000] irq 217: nobody cared (try booting with the "irqpoll" option)". To try this do the following.

Boot your PC until it gets past the BIOS and you see grub counting down.
Press escape, you will see a menu of kernels that can be booted. Usually the top one is the default, there may only be two lines.
Highlight the first one (probably already highlighted) and press "e" to edit. A new menu will appear.
Press down once then press "e" on the line that starts "kernel". You're now editing that line.
Backspace to remove "quiet" and "nosplash" and instead add in "irqpoll" (without the quotes) as per the suggestion above.
Press Enter when you have finished typing, then "b" to boot.

Other options which you can try instead of "irqpoll" which may or may not help are "noapic" "noacpi" and "acpi=off". Can you try each one individually and see if any of them help?

c2shield

我用 FC8的KDE桌面，鼠標亂飛，換成GNOME了就沒問題了……至今還不知道是什么問題……