IBM T43，華為EDGE卡上網的問題！Ubuntu8.04，內核升級到2.6.24-19(問題已經解決)

asia_ji

前幾日安裝好ubuntu，成功設置好了EDGE卡并撥號上網。誰知天有不測風云，在xp下使用分區工具刪除另外一個linux分區的時候，包括E盤在內的諸多盤都不翼而飛了，于是使用分區表工具恢復了分區，但是所有的linux分區都變成了未分區空間。

再次從裝了ubuntu后，發現系統識別的EDGE卡和上一次有些區別

原來：
插上設備的時候，多出ttyUSB0，1，2，3，4，5一系列設備

root@asia:~# dmesg |grep tty
[    4.538995] console [tty0] enabled
[    6.395706] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   29.405636] usb 6-1: airprime converter now attached to ttyUSB0
[   29.405681] usb 6-1: airprime converter now attached to ttyUSB1
[   29.405725] usb 6-1: airprime converter now attached to ttyUSB2
[   29.418744] usb 6-1: airprime converter now attached to ttyUSB3
[   29.418789] usb 6-1: airprime converter now attached to ttyUSB4
[   29.418836] usb 6-1: airprime converter now attached to ttyUSB5
[   31.169171] audit(1214542582.464:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5161 profile="/usr/sbin/cupsd" namespace="default"

現在：
較之原來缺少了USB3，4，5
[   11.316735] console [tty0] enabled
[   13.125485] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[   39.070248] usb 6-1: airprime converter now attached to ttyUSB0
[   39.070298] usb 6-1: airprime converter now attached to ttyUSB1
[   39.070342] usb 6-1: airprime converter now attached to ttyUSB2
[   47.502244] audit(1215052757.361:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5116 profile="/usr/sbin/cupsd" namespace="default"

查看設備
root@ubuntu:~# setserial -a /dev/ttyUSB0
/dev/ttyUSB0: No such file or directory

而：
root@ubuntu:~# ls /dev/ttyUSB
ttyUSB0  ttyUSB1  ttyUSB2

本人乃ubuntu新手，以前一直在RHEL平臺，實在不知問題究竟出在哪里，特請大家?guī)兔Γ?br />
另，我又在另一個分區上安裝了同樣的ubuntu8.04，結果還是現在這個樣子，不知道為什么不能恢復第一次的樣子。題

[ 本帖最后由 asia_ji 于 2008-7-6 15:30 編輯 ]

asia_ji

每次
root@ubuntu:~# setserial -a /dev/ttyUSB0
都會有下列信息出現

[  232.416331] airprime ttyUSB0: airprime_open - failed submitting read urb 0 for port 0, error -2
[  232.416437] airprime ttyUSB1: airprime_open - failed submitting read urb 0 for port 1, error -8
[  232.416592] airprime ttyUSB2: airprime_open - failed submitting read urb 0 for port 2, error -8
[  275.786647] airprime ttyUSB0: airprime_open - failed submitting read urb 0 for port 0, error -2
[ 1853.436191] airprime ttyUSB0: airprime_open - failed submitting read urb 0 for port 0, error -2
[ 1864.192653] airprime ttyUSB0: airprime_open - failed submitting read urb 0 for port 0, error -2

[ 本帖最后由 asia_ji 于 2008-7-3 15:17 編輯 ]

asia_ji

在插入設備和拔出設備時的/var/log/messages的輸出，還請各位cu朋友根據我給出的信息，幫忙指點迷津 ，我究竟如何才能使用這個設備上網呀？？


插入設備：
Jul  3 16:08:02 ubuntu kernel: [ 3280.120956] pccard: CardBus card inserted into slot 0
Jul  3 16:08:03 ubuntu kernel: [ 3280.658451] PCI: Enabling device 0000:0c:00.0 (0000 -> 0002)
Jul  3 16:08:03 ubuntu kernel: [ 3280.658466] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul  3 16:08:03 ubuntu kernel: [ 3280.658500] ohci_hcd 0000:0c:00.0: OHCI Host Controller
Jul  3 16:08:03 ubuntu kernel: [ 3280.659564] ohci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 6
Jul  3 16:08:03 ubuntu kernel: [ 3280.659897] ohci_hcd 0000:0c:00.0: irq 16, io mem 0xb8000000
Jul  3 16:08:03 ubuntu kernel: [ 3280.743804] usb usb6: configuration #1 chosen from 1 choice
Jul  3 16:08:03 ubuntu kernel: [ 3280.744526] hub 6-0:1.0: USB hub found
Jul  3 16:08:03 ubuntu kernel: [ 3280.745013] hub 6-0:1.0: 1 port detected
Jul  3 16:08:03 ubuntu kernel: [ 3280.846127] PCI: Enabling device 0000:0c:00.1 (0000 -> 0002)
Jul  3 16:08:03 ubuntu kernel: [ 3280.846143] ACPI: PCI Interrupt 0000:0c:00.1[B] -> GSI 16 (level, low) -> IRQ 16
Jul  3 16:08:03 ubuntu kernel: [ 3280.846184] ohci_hcd 0000:0c:00.1: OHCI Host Controller
Jul  3 16:08:03 ubuntu kernel: [ 3280.847279] ohci_hcd 0000:0c:00.1: new USB bus registered, assigned bus number 7
Jul  3 16:08:03 ubuntu kernel: [ 3280.847804] ohci_hcd 0000:0c:00.1: irq 16, io mem 0xb8001000
Jul  3 16:08:03 ubuntu kernel: [ 3280.933713] usb usb7: configuration #1 chosen from 1 choice
Jul  3 16:08:03 ubuntu kernel: [ 3280.934294] hub 7-0:1.0: USB hub found
Jul  3 16:08:03 ubuntu kernel: [ 3280.934540] hub 7-0:1.0: 1 port detected
Jul  3 16:08:07 ubuntu kernel: [ 3287.329755] usb 6-1: new full speed USB device using ohci_hcd and address 2
Jul  3 16:08:07 ubuntu kernel: [ 3287.542964] usb 6-1: configuration #1 chosen from 1 choice
Jul  3 16:08:08 ubuntu kernel: [ 3288.338948] usbcore: registered new interface driver usbserial
Jul  3 16:08:08 ubuntu kernel: [ 3288.339355] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
Jul  3 16:08:08 ubuntu kernel: [ 3288.339813] usbcore: registered new interface driver usbserial_generic
Jul  3 16:08:08 ubuntu kernel: [ 3288.339820] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
Jul  3 16:08:08 ubuntu kernel: [ 3288.369964] /build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial support registered for airprime
Jul  3 16:08:08 ubuntu kernel: [ 3288.370002] airprime 6-1:1.0: airprime converter detected
Jul  3 16:08:08 ubuntu kernel: [ 3288.370193] usb 6-1: airprime converter now attached to ttyUSB0
Jul  3 16:08:08 ubuntu kernel: [ 3288.370298] usb 6-1: airprime converter now attached to ttyUSB1
Jul  3 16:08:08 ubuntu kernel: [ 3288.370403] usb 6-1: airprime converter now attached to ttyUSB2
Jul  3 16:08:08 ubuntu kernel: [ 3288.370422] usbcore: registered new interface driver airprime
Jul  3 16:08:08 ubuntu kernel: [ 1971.131916] usbcore: registered new interface driver libusual

拔出設備：
Jul  3 16:12:24 ubuntu kernel: [ 3627.543809] pccard: card ejected from slot 0
Jul  3 16:12:24 ubuntu kernel: [ 3627.544198] usb 6-1: USB disconnect, address 2
Jul  3 16:12:24 ubuntu kernel: [ 3627.544708] airprime ttyUSB0: airprime converter now disconnected from ttyUSB0
Jul  3 16:12:24 ubuntu kernel: [ 3627.544959] airprime ttyUSB1: airprime converter now disconnected from ttyUSB1
Jul  3 16:12:24 ubuntu kernel: [ 3627.545207] airprime ttyUSB2: airprime converter now disconnected from ttyUSB2
Jul  3 16:12:24 ubuntu kernel: [ 3627.545236] airprime 6-1:1.0: device disconnected
Jul  3 16:12:24 ubuntu kernel: [ 1552.270175] ohci_hcd 0000:0c:00.0: remove, state 0
Jul  3 16:12:24 ubuntu kernel: [ 1552.270185] usb usb6: USB disconnect, address 1
Jul  3 16:12:24 ubuntu kernel: [ 1552.270370] ohci_hcd 0000:0c:00.0: USB bus 6 deregistered
Jul  3 16:12:24 ubuntu kernel: [ 1552.270415] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
Jul  3 16:12:24 ubuntu kernel: [ 1552.270456] ohci_hcd 0000:0c:00.1: remove, state 0
Jul  3 16:12:24 ubuntu kernel: [ 1552.270461] usb usb7: USB disconnect, address 1
Jul  3 16:12:24 ubuntu kernel: [ 1552.270605] ohci_hcd 0000:0c:00.1: USB bus 7 deregistered
Jul  3 16:12:24 ubuntu kernel: [ 1552.270631] ACPI: PCI interrupt for device 0000:0c:00.1 disabled


再次插入設備：
Jul  3 16:16:57 ubuntu kernel: [ 4008.698071] pccard: CardBus card inserted into slot 0
Jul  3 16:16:57 ubuntu kernel: [ 4008.698486] PCI: Enabling device 0000:0c:00.0 (0000 -> 0002)
Jul  3 16:16:57 ubuntu kernel: [ 4008.698499] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jul  3 16:16:57 ubuntu kernel: [ 4008.698543] ohci_hcd 0000:0c:00.0: OHCI Host Controller
Jul  3 16:16:57 ubuntu kernel: [ 4008.698597] ohci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 6
Jul  3 16:16:57 ubuntu kernel: [ 4008.698622] ohci_hcd 0000:0c:00.0: irq 16, io mem 0xb8000000
Jul  3 16:16:57 ubuntu kernel: [ 4008.784539] usb usb6: configuration #1 chosen from 1 choice
Jul  3 16:16:57 ubuntu kernel: [ 4008.784945] hub 6-0:1.0: USB hub found
Jul  3 16:16:57 ubuntu kernel: [ 4008.785184] hub 6-0:1.0: 1 port detected
Jul  3 16:16:57 ubuntu kernel: [ 1715.472777] PCI: Enabling device 0000:0c:00.1 (0000 -> 0002)
Jul  3 16:16:57 ubuntu kernel: [ 1715.472789] ACPI: PCI Interrupt 0000:0c:00.1[B] -> GSI 16 (level, low) -> IRQ 16
Jul  3 16:16:57 ubuntu kernel: [ 1715.472823] ohci_hcd 0000:0c:00.1: OHCI Host Controller
Jul  3 16:16:57 ubuntu kernel: [ 1715.472846] ohci_hcd 0000:0c:00.1: new USB bus registered, assigned bus number 7
Jul  3 16:16:57 ubuntu kernel: [ 1715.472861] ohci_hcd 0000:0c:00.1: irq 16, io mem 0xb8001000
Jul  3 16:16:58 ubuntu kernel: [ 1715.558435] usb usb7: configuration #1 chosen from 1 choice
Jul  3 16:16:58 ubuntu kernel: [ 1715.558670] hub 7-0:1.0: USB hub found
Jul  3 16:16:58 ubuntu kernel: [ 1715.558862] hub 7-0:1.0: 1 port detected
Jul  3 16:17:02 ubuntu kernel: [ 4014.962122] usb 6-1: new full speed USB device using ohci_hcd and address 2
Jul  3 16:17:02 ubuntu kernel: [ 4015.174331] usb 6-1: configuration #1 chosen from 1 choice
Jul  3 16:17:02 ubuntu kernel: [ 4015.182130] airprime 6-1:1.0: airprime converter detected
Jul  3 16:17:02 ubuntu kernel: [ 4015.182323] usb 6-1: airprime converter now attached to ttyUSB0
Jul  3 16:17:02 ubuntu kernel: [ 4015.182427] usb 6-1: airprime converter now attached to ttyUSB1
Jul  3 16:17:02 ubuntu kernel: [ 4015.182529] usb 6-1: airprime converter now attached to ttyUSB2

[ 本帖最后由 asia_ji 于 2008-7-3 16:42 編輯 ]

asia_ji

再次懇請大家?guī)兔Ψ治鲈�因�?/td>

asia_ji

難道沒有人和我遇到同樣的問題么？

asia_ji

我的無線上網卡是華為的EG602，結果被系統（ubuntu8.04)識別成華為E220

root@ubuntu:~# lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 046d:c019 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

[ 本帖最后由 asia_ji 于 2008-7-5 16:30 編輯 ]

cnjnhu

富人們的討論，別說是無線卡，
我的筆記本電腦還沒見到呢

asia_ji

無語了�。。。。。。。。。。�！

asia_ji

無語了！�。。。。。。。。。。�

asia_ji

哈哈，今天終于把問題給解決了

解決方法如下：

啟動系統后，把原來系統加載的模塊刪除掉
root@ubuntu:~# rmmod airprime usbserial

把卡彈出后在插入后，奇跡出現了

root@ubuntu:~# dmesg |grep tty
[  765.702220] usb 6-1: airprime converter now attached to ttyUSB0
[  765.702329] usb 6-1: airprime converter now attached to ttyUSB1
[  765.702430] usb 6-1: airprime converter now attached to ttyUSB2
[  765.709661] usb 6-1: airprime converter now attached to ttyUSB3
[  765.709785] usb 6-1: airprime converter now attached to ttyUSB4
[  765.709888] usb 6-1: airprime converter now attached to ttyUSB5

直覺告訴我，問題已經迎刃而解了！
果然
root@ubuntu:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Starting PPP immediately.
--> Starting pppd at Sun Jul  6 15:01:58 2008
--> Pid of pppd: 7154
--> Using interface ppp0
--> local  IP address 10.48.161.254
--> remote IP address 10.64.64.64
--> primary   DNS address 211.137.32.178
--> secondary DNS address 211.136.17.107

哈哈，困擾我?guī)滋斓碾y題解決了！

root@ubuntu:~# lsusb
Bus 007 Device 001: ID 0000:0000  
Bus 006 Device 003: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem
Bus 006 Device 001: ID 0000:0000  
Bus 005 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 003: ID 046d:c019 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  

暈，居然EG602卡還是被系統識別成E220，無所謂了，反正好用了�。�