HP570服務器如何使用SAN的磁盤？

patrick968

Server：HP ML 570 G3
FC card：QLogic QLA2312 PCI to Fibre Channel Host Adapter （2個）
OS：RHL ES 3(缺省安裝)
SAN： HP EVA4000
問題：服務器如何使用SAN的磁盤?

motang

如果認出盤來了，直接用就是了。如果沒有認出盤來，你要先配置SAN存儲。安裝驅動，配置它們。不時簡單的活。

achlice

SAN： HP EVA4000
問題：服務器如何使用SAN的磁盤?

  應該真接認不出來， 可能的步驟 如下～～～
    1：首先要配置好 存儲機，
      2： 然后配置本機（RH3）的iscsi（如果是這個的話） ，配置好后重啟iscsi
    3: fdisk -l       看有沒有新 硬盤出現。如果有，對硬盤進行分區和格式化，掛載
  沒有的話，再重新檢查 以上步驟～～

patrick968

achlice 是對的。
認不到盤。
你說用ISCSI，但是我的是直接光纖連接的，難道也用ISCSI？
SAN那邊已經分配了50GB的空間給他了，我起初也是懷疑驅動的問題，我從HP網站上下載了驅動了，也安裝了，但安裝不成功。信息如下：
Installing hp_qla2x00src RPM...

error: open of ./hp_qla2x00src-7.07.05.08-1.linux.rpm failed: No such file or directory

Installing fibreutils...

Preparing...                ########################################### [100%]
        package fibreutils-2.4-1 is already installed

不知道是怎么回事？

jerrywjl

我建議換個高版本的操作系統試試。

polokus

沒接觸過SAN，LZ在Google或者百度中搜過么

patrick968

有在google查過，但沒有結果。如果能用新的就不用在這里問了，請各位高手再指點一下。

patrick968

我的dmesg的內容如下：

1    1    72
07 00F 0F  1    1    0   1   0    1    1    7A
08 000 00  1    0    0   0   0    0    0    00
09 000 00  1    0    0   0   0    0    0    00
0a 000 00  1    0    0   0   0    0    0    00
0b 000 00  1    0    0   0   0    0    0    00
0c 000 00  1    0    0   0   0    0    0    00
0d 000 00  1    0    0   0   0    0    0    00
0e 000 00  1    0    0   0   0    0    0    00
0f 000 00  1    0    0   0   0    0    0    00
10 000 00  1    0    0   0   0    0    0    00
11 000 00  1    0    0   0   0    0    0    00
12 000 00  1    0    0   0   0    0    0    00
13 000 00  1    0    0   0   0    0    0    00
14 000 00  1    0    0   0   0    0    0    00
15 000 00  1    0    0   0   0    0    0    00
16 000 00  1    0    0   0   0    0    0    00
17 000 00  1    0    0   0   0    0    0    00

IO APIC #4......
.... register #00: 04000000
.......    : physical APIC id: 04
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 04000000
.......     : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
00 000 00  1    0    0   0   0    0    0    00
01 00F 0F  1    1    0   1   0    1    1    82
02 00F 0F  1    1    0   1   0    1    1    8A
03 000 00  1    0    0   0   0    0    0    00
04 000 00  1    0    0   0   0    0    0    00
05 000 00  1    0    0   0   0    0    0    00
06 000 00  1    0    0   0   0    0    0    00
07 000 00  1    0    0   0   0    0    0    00
08 000 00  1    0    0   0   0    0    0    00
09 000 00  1    0    0   0   0    0    0    00
0a 000 00  1    0    0   0   0    0    0    00
0b 000 00  1    0    0   0   0    0    0    00
0c 000 00  1    0    0   0   0    0    0    00
0d 000 00  1    0    0   0   0    0    0    00
0e 000 00  1    0    0   0   0    0    0    00
0f 000 00  1    0    0   0   0    0    0    00
10 000 00  1    0    0   0   0    0    0    00
11 000 00  1    0    0   0   0    0    0    00
12 000 00  1    0    0   0   0    0    0    00
13 000 00  1    0    0   0   0    0    0    00
14 000 00  1    0    0   0   0    0    0    00
15 000 00  1    0    0   0   0    0    0    00
16 000 00  1    0    0   0   0    0    0    00
17 00F 0F  1    1    0   1   0    1    1    92

IO APIC #5......
.... register #00: 05000000
.......    : physical APIC id: 05
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 05000000
.......     : arbitration: 05
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
00 000 00  1    0    0   0   0    0    0    00
01 00F 0F  1    1    0   1   0    1    1    9A
02 00F 0F  1    1    0   1   0    1    1    A2
03 000 00  1    0    0   0   0    0    0    00
04 000 00  1    0    0   0   0    0    0    00
05 000 00  1    0    0   0   0    0    0    00
06 000 00  1    0    0   0   0    0    0    00
07 000 00  1    0    0   0   0    0    0    00
08 000 00  1    0    0   0   0    0    0    00
09 000 00  1    0    0   0   0    0    0    00
0a 000 00  1    0    0   0   0    0    0    00
0b 000 00  1    0    0   0   0    0    0    00
0c 000 00  1    0    0   0   0    0    0    00
0d 000 00  1    0    0   0   0    0    0    00
0e 000 00  1    0    0   0   0    0    0    00
0f 000 00  1    0    0   0   0    0    0    00
10 000 00  1    0    0   0   0    0    0    00
11 000 00  1    0    0   0   0    0    0    00
12 000 00  1    0    0   0   0    0    0    00
13 000 00  1    0    0   0   0    0    0    00
14 000 00  1    0    0   0   0    0    0    00
15 000 00  1    0    0   0   0    0    0    00
16 000 00  1    0    0   0   0    0    0    00
17 00F 0F  1    1    0   1   0    1    1    AA
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
IRQ25 -> 1:1
IRQ26 -> 1:2
IRQ29 -> 1:5
IRQ30 -> 1:6
IRQ33 -> 1:9
IRQ34 -> 1:10
IRQ49 -> 2:1
IRQ50 -> 2:2
IRQ51 -> 2:3
IRQ53 -> 2:5
IRQ54 -> 2:6
IRQ55 -> 2:7
IRQ73 -> 3:1
IRQ74 -> 3:2
IRQ95 -> 3:23
IRQ97 -> 4:1
IRQ98 -> 4:2
IRQ119 -> 4:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3666.4250 MHz.
..... host bus clock speed is 166.6556 MHz.
cpu: 0, clocks: 1666556, slice: 333311
CPU0<T0:1666544,T1:1333232,D:1,S:333311,C:1666556>
cpu: 1, clocks: 1666556, slice: 333311
cpu: 3, clocks: 1666556, slice: 333311
cpu: 2, clocks: 1666556, slice: 333311
CPU2<T0:1666544,T1:666608,D:3,S:333311,C:1666556>
CPU3<T0:1666544,T1:333296,D:4,S:333311,C:1666556>
CPU1<T0:1666544,T1:999920,D:2,S:333311,C:1666556>
cpu_sibling_map[0] = 2
cpu_sibling_map[1] = 3
cpu_sibling_map[2] = 0
cpu_sibling_map[3] = 1
mapping CPU#0's runqueue to CPU#2's runqueue.
mapping CPU#1's runqueue to CPU#3's runqueue.
zapping low mappings.
Process timing init...done.
Starting migration thread for cpu 0
Starting migration thread for cpu 1
Starting migration thread for cpu 2
Starting migration thread for cpu 3
PCI: PCI BIOS revision 2.10 entry at 0xf0096, last bus=32
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B3,I1,P0) -> 25
PCI->APIC IRQ transform: (B3,I2,P0) -> 29
PCI->APIC IRQ transform: (B3,I3,P0) -> 33
PCI->APIC IRQ transform: (B3,I3,P1) -> 34
PCI->APIC IRQ transform: (B7,I3,P0) -> 51
PCI->APIC IRQ transform: (B7,I3,P1) -> 55
PCI->APIC IRQ transform: (B23,I0,P0) -> 95
PCI->APIC IRQ transform: (B23,I0,P1) -> 95
PCI BIOS passed nonexistent PCI bus 28!
PCI: using PPB(B27,I1,P0) to get irq 97
PCI->APIC IRQ transform: (B28,I4,P0) -> 97
PCI BIOS passed nonexistent PCI bus 28!
PCI: using PPB(B27,I1,P1) to get irq 98
PCI->APIC IRQ transform: (B28,I5,P1) -> 98
PCI->APIC IRQ transform: (B1,I0,P0) -> 21
PCI->APIC IRQ transform: (B1,I0,P1) -> 22
PCI: Device 00:00 not found by BIOS
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Total HugeTLB memory allocated, 0
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 294911
aio_setup: sizeof(struct page) = 60
Hugetlbfs mounted.
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-0 with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 256 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 00:1f.1
PCI: Enabling device 00:1f.1 (0005 -> 0007)
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hdaMA, hdb:pio
    ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
hda: DV-28E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-floppy driver 0.99.newide
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP: routing cache hash table of 65536 buckets, 512Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
Initializing IPsec netlink socket
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 441k freed
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
qla2x00_set_info starts at address = f8834060
qla2x00: Found  VID=1077 DID=2312 SSVID=e11 SSDID=100
scsi(0): Found a QLA2312  @ bus 3, device 0x1, irq 25, iobase 0xf887c000
scsi(0): Allocated 4096 SRB(s).
scsi(0): Configure NVRAM parameters...
scsi(0): 64 Bit PCI Addressing Enabled.
scsi(0): Scatter/Gather entries= 3584
qla2x00_nvram_config ZIO enabled:intr_timer_delay=3
scsi(0): Verifying loaded RISC code...
scsi(0): Verifying chip...
scsi(0): Waiting for LIP to complete...
scsi(0): LIP reset occurred.
scsi(0): LOOP UP detected.
scsi(0): Port database changed.
scsi(0) qla2x00_isr MBA_PORT_UPDATE ignored
scsi(0): Topology - (F_Port), Host Loop address 0xffff
qla2x00: Found  VID=1077 DID=2312 SSVID=e11 SSDID=100
scsi(1): Found a QLA2312  @ bus 3, device 0x2, irq 29, iobase 0xf887e000
scsi(1): Allocated 4096 SRB(s).
scsi(1): Configure NVRAM parameters...
scsi(1): 64 Bit PCI Addressing Enabled.
scsi(1): Scatter/Gather entries= 3584
qla2x00_nvram_config ZIO enabled:intr_timer_delay=3
scsi(1): Verifying loaded RISC code...
scsi(1): Verifying chip...
scsi(1): Waiting for LIP to complete...
scsi(1): LIP reset occurred.
scsi(1): LOOP UP detected.
scsi(1): Port database changed.
scsi(1) qla2x00_isr MBA_PORT_UPDATE ignored
scsi(1): Topology - (F_Port), Host Loop address 0xffff
scsi0 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 3 device 1 irq 25
        Firmware version:  3.02.13, Driver version 6.06.00b11

scsi1 : QLogic QLA2312 PCI to Fibre Channel Host Adapter: bus 3 device 2 irq 29
        Firmware version:  3.02.13, Driver version 6.06.00b11

initializing plug timer for queue c6e2d218
Starting timer : 1 1
blk: queue c6e2d218, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi: unknown type 12
  Vendor: HP        Model: HSV200            Rev: 6110
  Type:   Unknown                            ANSI SCSI revision: 05
initializing plug timer for queue c6e2d018
Starting timer : 1 1
blk: queue c6e2d018, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi: unknown type 12
  Vendor: HP        Model: HSV200            Rev: 6110
  Type:   Unknown                            ANSI SCSI revision: 05
initializing plug timer for queue f63cfe18
Starting timer : 1 1
blk: queue f63cfe18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi(0:0:0:0): Enabled tagged queuing, queue depth 64.
scsi(0:0:1:0): Enabled tagged queuing, queue depth 64.
initializing plug timer for queue f63cfe18
Starting timer : 1 1
scsi: unknown type 12
  Vendor: HP        Model: HSV200            Rev: 6110
  Type:   Unknown                            ANSI SCSI revision: 05
initializing plug timer for queue f63cfc18
Starting timer : 1 1
blk: queue f63cfc18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi: unknown type 12
  Vendor: HP        Model: HSV200            Rev: 6110
  Type:   Unknown                            ANSI SCSI revision: 05
initializing plug timer for queue f63cfa18
Starting timer : 1 1
blk: queue f63cfa18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
scsi(1:0:0:0): Enabled tagged queuing, queue depth 64.
scsi(1:0:1:0): Enabled tagged queuing, queue depth 64.
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
Fusion MPT base driver 2.05.05+
Copyright (c) 1999-2002 LSI Logic Corporation
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
mptbase: 2 MPT adapters found, 2 installed.
Fusion MPT SCSI Host driver 2.05.05+
scsi2 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=51
scsi3 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=55
Starting timer : 0 0
blk: queue f62f8e18, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Starting timer : 0 0
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
resize_dma_pool: unknown device type 12
HP CISS Driver (v 2.4.47.RH1)
cciss: Device 0x46 has been found at bus 28 dev 4 func 0
      blocks= 286734240 block_size= 512
      heads= 255, sectors= 32, cylinders= 35139 RAID 1(0+1)

      blocks= 286734240 block_size= 512
      heads= 255, sectors= 32, cylinders= 35139 RAID 1(0+1)

blk: queue c04f99a0, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Partition check:
cciss/c0d0: p1 p2 p3 p4 < p5 >
cciss/c0d1: unknown partition table
cciss: Device 0x46 has been found at bus 28 dev 5 func 0
blk: queue c04f9a70, I/O limit 4294967295Mb (mask 0xffffffffffffffff)
Journalled Block Device driver loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 224k freed
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,1), internal journal
Adding Swap: 8192632k swap-space (priority -1)
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on cciss0(104,16), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
IA-32 Microcode Update Driver: v1.11 <tigran@veritas.com>
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
inserting floppy driver for 2.4.21-4.ELsmp
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
tg3.c:v2.2 (August 24, 2003)
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:15:60:53:71:8f
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:15:60:53:71:8e
divert: freeing divert_blk for eth0
divert: freeing divert_blk for eth1
ip_tables: (C) 2000-2002 Netfilter core team
tg3.c:v2.2 (August 24, 2003)
divert: allocating divert_blk for eth0
eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:15:60:53:71:8f
divert: allocating divert_blk for eth1
eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:15:60:53:71:8e
ip_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
tg3: eth1: Link is up at 100 Mbps, full duplex.
tg3: eth1: Flow control is off for TX and off for RX.
device eth1 entered promiscuous mode
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
lp0: using parport0 (polling).
lp0: console ready

請那位指點一下？