亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

  免費注冊 查看新帖 |

Chinaunix

  平臺 論壇 博客 文庫
12下一頁
最近訪問板塊 發新帖
查看: 6575 | 回復: 13
打印 上一主題 下一主題

通過紅帽的Piranha做集群，可是ipvsadm -ln沒有realserver。 [復制鏈接]

論壇徽章:
0
跳轉到指定樓層
1樓 [收藏(0)] [報告]
發表于 2009-03-19 17:30 |只看該作者 |倒序瀏覽
12

[ 本帖最后由 adminsinx 于 2009-3-20 15:10 編輯 ]

論壇徽章:
0
2樓 [報告]
發表于 2009-03-19 17:38 |只看該作者

回復 #1 adminsinx 的帖子

pulse的日志放上來 cat /var/log/messages 中關于pulse的部分
/etc/sysconfig/ha/lvs.cfg 也放上來

論壇徽章:
0
3樓 [報告]
發表于 2009-03-19 17:53 |只看該作者
lvs.cfg
----------------------------------------------------------------
primary = 10.10.21.10                     
#primary_private = 10.10.21.10            
service = lvs                                
backup_active = 1                           
backup = 10.10.21.11                     
#backup_private = 10.10.21.11            
heartbeat = 1                                
heartbeat_port = 539                        
keepalive = 3                                
deadtime = 12                                
network = direct                             
debug_level = NONE                           
virtual HTTP {                              
        active = 1                           
        address = 10.10.21.30 eth0:1   
        vip_nmask = 255.255.255.255         
#       fwmark = 80                          
        port = 80                           
        persistent = 320                     
        send = "GET /.lvs.html\r\n"         
        expect = "OK"
        use_regex = 1                              
        load_monitor = none                  
        scheduler = wlc                     
        protocol = tcp                       
        timeout = 5                          
        reentry = 10                        
        quiesce_server = 0                  
        server one {                        
               address = 10.10.21.20      
               active = 1                    
               weight = 100                  
        }                                    
        server two {                        
               address = 10.10.21.21      
               active = 1                    
               weight = 100                  
        }                                    
}                                            


log 又出現過正常的，現在都不正常了。
--------------------------------------------------------------
Mar 19 16:37:24 lvs2 pulse[6409]: gratuitous lvs arps finished
Mar 19 16:37:25 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:37:25 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:37:37 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:37:37 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:37:49 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:37:49 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:38:01 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:38:01 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:38:13 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:38:13 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:38:25 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:38:25 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:38:37 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:38:37 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:38:49 lvs2 nanny[6406]: READ to 10.10.21.20:80 timed out
Mar 19 16:38:49 lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out
Mar 19 16:38:49 lvs2 pulse[6401]: Terminating due to signal 15
Mar 19 16:38:49 lvs2 lvs[6403]: shutting down due to signal 15
Mar 19 16:38:49 lvs2 lvs[6403]: shutting down virtual service lvs
Mar 19 16:38:49 lvs2 nanny[6406]: Terminating due to signal 15
Mar 19 16:38:49 lvs2 nanny[6407]: Terminating due to signal 15
Mar 19 16:38:49 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 16:42:32 lvs2 pulse: SIOCGIFADDR failed: Cannot assign requested address
Mar 19 16:42:32 lvs2 pulse[6472]: STARTING PULSE AS BACKUP
Mar 19 16:56:48 lvs2 pulse: SIOCGIFADDR failed: Cannot assign requested address
Mar 19 16:56:48 lvs2 pulse[6615]: STARTING PULSE AS BACKUP
Mar 19 17:02:44 lvs2 pulse[6615]: Terminating due to signal 15
Mar 19 17:02:44 lvs2 pulse: SIOCGIFADDR failed: Cannot assign requested address
Mar 19 17:02:44 lvs2 pulse[6681]: STARTING PULSE AS BACKUP
Mar 19 17:05:07 lvs2 pulse[6681]: Terminating due to signal 15
Mar 19 17:05:07 lvs2 pulse: SIOCGIFADDR failed: Cannot assign requested address
Mar 19 17:05:07 lvs2 pulse[6712]: STARTING PULSE AS BACKUP
Mar 19 17:06:42 lvs2 pulse[6712]: partner dead: activating lvs
Mar 19 17:06:42 lvs2 lvs[6726]: starting virtual service HTTP active: 80
Mar 19 17:06:42 lvs2 nanny[6729]: starting LVS client monitor for 10.10.21.30:80
Mar 19 17:06:42 lvs2 lvs[6726]: create_monitor for HTTP/one running as pid 6729
Mar 19 17:06:42 lvs2 lvs[6726]: create_monitor for HTTP/two running as pid 6730
Mar 19 17:06:42 lvs2 nanny[6730]: starting LVS client monitor for 10.10.21.30:80
Mar 19 17:06:42 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:06:42 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:06:42 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:06:44 lvs2 setroubleshoot: SELinux is preventing ifconfig (ifconfig_t) "read write" to socket (initrc_t). For complete SELinux messages. run sealert -l b1e8e7dd-c402-46a0-bace-40d62cb12ea4
Mar 19 17:06:47 lvs2 pulse[6732]: gratuitous lvs arps finished
Mar 19 17:08:45 lvs2 pulse[6712]: Terminating due to signal 15
Mar 19 17:08:45 lvs2 lvs[6726]: shutting down due to signal 15
Mar 19 17:08:45 lvs2 lvs[6726]: shutting down virtual service HTTP
Mar 19 17:08:45 lvs2 nanny[6729]: Terminating due to signal 15
Mar 19 17:08:45 lvs2 nanny[6730]: Terminating due to signal 15
Mar 19 17:08:45 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:08:46 lvs2 pulse: SIOCGIFADDR failed: Cannot assign requested address
Mar 19 17:08:46 lvs2 pulse[6789]: STARTING PULSE AS BACKUP
Mar 19 17:08:47 lvs2 pulse[6789]: primary inactive (link failure?): activating lvs
Mar 19 17:08:47 lvs2 lvs[6791]: starting virtual service HTTP active: 80
Mar 19 17:08:47 lvs2 nanny[6796]: starting LVS client monitor for 10.10.21.30:80
Mar 19 17:08:47 lvs2 lvs[6791]: create_monitor for HTTP/one running as pid 6796
Mar 19 17:08:47 lvs2 nanny[6797]: starting LVS client monitor for 10.10.21.30:80
Mar 19 17:08:47 lvs2 lvs[6791]: create_monitor for HTTP/two running as pid 6797
Mar 19 17:08:47 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:08:47 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:08:47 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:08:47 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:08:47 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:08:52 lvs2 pulse[6793]: gratuitous lvs arps finished
Mar 19 17:10:42 lvs2 yum-updatesd-helper: error getting update info: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
Mar 19 17:28:49 lvs2 pulse[6789]: Terminating due to signal 15
Mar 19 17:28:49 lvs2 lvs[6791]: shutting down due to signal 15
Mar 19 17:28:49 lvs2 lvs[6791]: shutting down virtual service HTTP
Mar 19 17:28:49 lvs2 nanny[6796]: Terminating due to signal 15
Mar 19 17:28:49 lvs2 nanny[6797]: Terminating due to signal 15
Mar 19 17:28:49 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:41:40 lvs2 pulse: SIOCGIFADDR failed: Cannot assign requested address
Mar 19 17:41:40 lvs2 pulse[6942]: STARTING PULSE AS BACKUP
Mar 19 17:41:40 lvs2 pulse[6942]: primary inactive (link failure?): activating lvs
Mar 19 17:41:40 lvs2 lvs[6944]: starting virtual service HTTP active: 80
Mar 19 17:41:40 lvs2 nanny[6947]: starting LVS client monitor for 10.10.21.30:80
Mar 19 17:41:40 lvs2 lvs[6944]: create_monitor for HTTP/one running as pid 6947
Mar 19 17:41:40 lvs2 nanny[6948]: starting LVS client monitor for 10.10.21.30:80
Mar 19 17:41:40 lvs2 lvs[6944]: create_monitor for HTTP/two running as pid 6948
Mar 19 17:41:40 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:41:40 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:41:40 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:41:40 lvs2 avahi-daemon[5186]: Withdrawing address record for 10.10.21.30 on eth0.
Mar 19 17:41:40 lvs2 avahi-daemon[5186]: Registering new address record for 10.10.21.30 on eth0.
Mar 19 17:41:45 lvs2 pulse[6950]: gratuitous lvs arps finished

[ 本帖最后由 adminsinx 于 2009-3-19 17:54 編輯 ]

論壇徽章:
0
4樓 [報告]
發表于 2009-03-19 21:07 |只看該作者

從配置文件和日志上分析如下

配置文件中的
  send = "GET /.lvs.html\r\n"     

首先要明晰一點就是訪問訪問的url的確認信息是否正確被驗證；
是否明確的使用了主從的配置，如果是就將主從上的日志都發上來分析；
是否已經執行
  1. run sealert -l b1e8e7dd-c402-46a0-bace-40d62cb12ea4
復制代碼

關鍵日志點:
lvs2 nanny[6407]: READ to 10.10.21.21:80 timed out

Mar 19 17:06:42 lvs2 pulse[6712]: partner dead: activating lvs  是在作切換測試么？

建議首先用pulse服務配置一臺調度服務器，測試沒有問題在配置主從的雙機的

論壇徽章:
0
5樓 [報告]
發表于 2009-03-19 23:07 |只看該作者
nanny提示超時.表示你沒有你的監控程序有問題.沒有監牢到真實的服務器.所以將LVS中的清空

論壇徽章:
0
6樓 [報告]
發表于 2009-03-20 08:59 |只看該作者
原帖由 kns1024wh 于 2009-3-19 21:07 發表
配置文件中的

首先要明晰一點就是訪問訪問的url的確認信息是否正確被驗證；
是否明確的使用了主從的配置，如果是就將主從上的日志都發上來分析；
是否已經執行run sealert -l b1e8e7dd-c402-46a0-bace-40d ...


如何知道  ‘url的確認信息是否正確被驗證’？

論壇徽章:
0
7樓 [報告]
發表于 2009-03-20 09:07 |只看該作者
我查了下web的log。
[Fri Mar 20 09:02:46 2009] [error] [client 10.10.21.10] File does not exist: /var/www/html/.lvs.html

好像是沒有通過驗證。是不是哪里還需要設置？

論壇徽章:
0
8樓 [報告]
發表于 2009-03-20 09:08 |只看該作者
原帖由 adminsinx 于 2009-3-20 09:07 發表
我查了下web的log。
[Fri Mar 20 09:02:46 2009] [error] [client 10.10.21.10] File does not exist: /var/www/html/.lvs.html

好像是沒有通過驗證。是不是哪里還需要設置？

步驟這樣把驗證那個部分使用piranha默認的方式就可以了

論壇徽章:
0
9樓 [報告]
發表于 2009-03-20 10:03 |只看該作者
改回默認的了。
現在的lvs.cfg
------------------------------------------
serial_no = 33
primary = 10.10.21.10
service = lvs
backup_active = 1
backup = 10.10.21.11
heartbeat = 1
heartbeat_port = 539
keepalive = 3
deadtime = 12
network = direct
debug_level = NONE
virtual HTTP {
     active = 1
     address = 10.10.21.30 eth0:1
     vip_nmask = 255.255.255.255
     port = 80
     persistent = 320
     send = "GET / HTTP/1.0rnrn"
     expect = "HTTP"
     use_regex = 1
     load_monitor = none
     scheduler = wlc
     protocol = tcp
     timeout = 5
     reentry = 10
     quiesce_server = 0
     server one {
         address = 10.10.21.20
         active = 1
         weight = 100
     }
     server two {
         address = 10.10.21.21
         active = 1
         weight = 100
     }
}


log
-----------------------------------------
Mar 20 09:54:02 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:54:02 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:54:12 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:54:12 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:54:22 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:54:22 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:54:32 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:54:32 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:54:42 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:54:42 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:54:52 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:54:52 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:55:02 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:55:02 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:55:12 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:55:12 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:55:22 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:55:22 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:55:32 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:55:32 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:55:42 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:55:42 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:55:52 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:55:52 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:56:02 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:56:02 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:56:12 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:56:12 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:56:22 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:56:22 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:56:32 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:56:32 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:56:42 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:56:42 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:56:52 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:56:52 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:57:02 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:57:02 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:57:12 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:57:12 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:57:22 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:57:22 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:57:32 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:57:32 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:57:42 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:57:42 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:57:52 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out
Mar 20 09:57:52 lvs1 nanny[6792]: READ to 10.10.21.21:80 timed out
Mar 20 09:58:02 lvs1 nanny[6791]: READ to 10.10.21.20:80 timed out

論壇徽章:
0
10樓 [報告]
發表于 2009-03-20 10:20 |只看該作者
終于可以了。
原來我通過web設置會自動變成
send = "GET / HTTP/1.0rnrn"
改成  send = "GET / HTTP/1.0\r\n\r\n"
就好了。謝謝兩位
您需要登錄后才可以回帖 登錄 | 注冊

本版積分規則 發表回復

  

北京盛拓優訊信息技術有限公司. 版權所有 京ICP備16024965號-6 北京市公安局海淀分局網監中心備案編號：11010802020122 niuxiaotong@pcpop.com 17352615567
未成年舉報專區
中國互聯網協會會員  聯系我們：huangweiwei@itpub.net
感謝所有關心和支持過ChinaUnix的朋友們 轉載本站內容請注明原作者名及出處

清除 Cookies - ChinaUnix - Archiver - WAP - TOP