fedora 7 如何裝顯卡驅動？

kee212

fedora 7 x86_64，設置不到我想要的分辨率，懷疑是驅動沒裝。請教高人。
顯卡是集成的，以下是主板信息：

1. [kee212@zenbin ~]$ /sbin/lspci
   
2. 00:00.0 Host bridge: Intel Corporation Unknown device 2e30 (rev 03)
   
3. 00:02.0 VGA compatible controller: Intel Corporation Unknown device 2e32 (rev 03)
   
4. 00:02.1 Display controller: Intel Corporation Unknown device 2e33 (rev 03)
   
5. 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
   
6. 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
   
7. 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
   
8. 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
   
9. 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
   
10. 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
    
11. 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
    
12. 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
    
13. 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
    
14. 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
    
15. 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10)

復制代碼

datacode

沒能正確識別 intel 集成顯卡，到 intel 網站搜索一下顯卡對應的 linux 驅動，然后安裝

jerrywjl

intel的顯卡驅動不太好裝，你還是換個高版本的fedora。
過兩天f11就出來了，正好可以體驗一把。

polokus

Fedora 7 是老了點，F(xiàn)edora11好像是還有六天發布

www_xylove

F7 drop ;F11 accept  ....but ...wait

www_xylove

樓主集成顯卡是什么芯片啊，只有知道了顯卡的芯片才能依據芯片下載相應的顯卡驅動

chenyx

不認識顯卡

2009fun

不懂~~~~~~~~

4seas

到官網下一個驅動

lyjinger

不想麻煩的話就升級fedora吧