nis 數據庫建立不了

fatbird00055

1. [root@linux1 ~]# /usr/lib/yp/ypinit -m   
   
2. 
   
3. At this point, we have to construct a list of the hosts which will run NIS
   
4. servers.  linux1 is in the list of NIS server hosts.  Please continue to add
   
5. the names for the other hosts, one per line.  When you are done with the
   
6. list, type a <control D>.
   
7.         next host to add:  linux1
   
8.         next host to add:  

復制代碼

就這樣不動了，停了，請問各位大俠什么情況

ypserv.conf文件

1. [root@linux1 ~]# vim /etc/ypserv.conf  
   
2. 
   
3. 
   
4. # Some options for ypserv. This things are all not needed, if
   
5. # you have a Linux net.
   
6. 
   
7. # Should we do DNS lookups for hosts not found in the hosts table ?
   
8. # This option is ignored in the moment.
   
9. dns: no
   
10. 
    
11. # How many map file handles should be cached ?
    
12. files: 30
    
13. 
    
14. # Should we register ypserv with SLP ?
    
15. slp: no
    
16. # After how many seconds we should re-register ypserv with SLP ?
    
17. slp_timeout: 3600
    
18. 
    
19. # xfr requests are only allowed from ports < 1024
    
20. xfr_check_port: yes
    
21. 
    
22. # The following, when uncommented,  will give you shadow like passwords.
    
23. # Note that it will not work if you have slave NIS servers in your
    
24. # network that do not run the same server as you.
    
25. 
    
26. # Host                     : Domain  : Map              : Security
    
27. #
    
28. # *                        : *       : passwd.byname    : port
    
29. # *                        : *       : passwd.byuid     : port
    
30. 127.0.0.1/255.255.255.0:dmz:*:none
    
31. 192.168.1.3/255.255.255.0:dmz:*:none
    
32. *:*:*:deny
    
33. # Not everybody should see the shadow passwords, not secure, since
    
34. # under MSDOG everbody is root and can access ports < 1024 !!!
    
35. *                          : *       : shadow.byname    : port
    
36. *                          : *       : passwd.adjunct.byname : port
    
37. 
    
38. # If you comment out the next rule, ypserv and rpc.ypxfrd will
    
39. # look for YP_SECURE and YP_AUTHDES in the maps. This will make
    
40. # the security check a little bit slower, but you only have to
    
41. # change the keys on the master server, not the configuration files
    
42. "/etc/ypserv.conf" 51L, 1839C 已寫入                           

復制代碼

1. [root@linux1 ~]# vim /etc/sysconfig/network
   
2. 
   
3. NETWORKING=yes
   
4. NETWORKING_IPV6=no
   
5. HOSTNAME=linux1
   
6. NISDOMAIN=dmz

復制代碼

fatbird00055

我明白了，要按ctrl+D 郁悶！！自己解決

chenyx

When you are done with the list, type a <control D>.

呵呵,提示很明白

blueswxs

呵呵,提示很明白
chenyx 發表于 2010-02-12 21:13

英語閱讀  一定要積累呀。

nagaregawa

回復 1# fatbird00055


    應該運行一下 domainname=dmz