squid 部分站點慢的無法至無法完成操作，求解

root_wxt

squid 3.1

絕大部分網站都OK，沒發現問題，只有這個網站速度狂慢，以至無法操作
http://eprocurement.delta.com.tw/ezECWeb/

哪位兄弟指導一下

squid的配置，最小配置，透明代理
acl manager proto cache_object
acl localhost src 127.0.0.1/32
#IPv6 Not Available: acl localhost src ::1/128
acl to_localhost dst 127.0.0.0/8 0.0.0.0/32
#IPv6 Not Available: acl to_localhost dst ::1/128

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed
#acl localnet src 10.0.0.0/8    # RFC1918 possible internal network
#acl localnet src 172.16.0.0/12 # RFC1918 possible internal network
acl localnet src 192.168.0.0/16 # RFC1918 possible internal network
#IPv6 Not Available: acl localnet src fc00::/7   # RFC 4193 local private network range
#IPv6 Not Available: acl localnet src fe80::/10  # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80          # http
acl Safe_ports port 21          # ftp
acl Safe_ports port 443         # https
acl Safe_ports port 70          # gopher
acl Safe_ports port 210         # wais
acl Safe_ports port 1025-65535  # unregistered ports
acl Safe_ports port 280         # http-mgmt
acl Safe_ports port 488         # gss-http
acl Safe_ports port 591         # filemaker
acl Safe_ports port 777         # multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#
# Only allow cachemgr access from localhost
http_access allow manager localhost
http_access deny manager

# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

acl denysites url_regex -i "/opt/squid/etc/denysites"
acl denyfiles urlpath_regex -i \.swf$

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed

http_access deny denysites
http_access deny denyfiles

http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access deny all

# Squid normally listens to port 3128
http_port 3128 transparent

# We recommend you to use at least the following line.
hierarchy_stoplist cgi-bin ?

# Uncomment and adjust the following to add a disk cache directory.
#cache_dir ufs /opt/squid/var/cache 100 16 256

# Leave coredumps in the first cache dir
coredump_dir /opt/squid/var/cache


# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:           1440    20%     10080
refresh_pattern ^gopher:        1440    0%      1440
refresh_pattern -i (/cgi-bin/|\?) 0     0%      0
refresh_pattern .               0       20%     4320


cache_effective_user squid
cache_effective_group squid

zqduke

跟你情況類似·~不過我是正向代理~~就是不知道是什么問題~~已經搞了好就了~~別的電腦安裝都可以代理~~就唯獨出問題這臺，先懷疑是硬件配置問題了，不過仍沒答案，困惑