- 論壇徽章:
- 0
|
ComixWall 4.6發(fā)布了，增加了中文支持，安裝比之前的版本，簡單多了！
官方 InstallationGuide.txt
ComixWall installation is very intuitive and easy, just follow the instructions on the screen and answer the questions asked. You are advised to accept the default answers to all the questions. In fact, the installation can be completed by accepting default answers all the way from the first question until the last. The only obvious exceptions are network configuration and password setup.
Auto allocator will provide a partition layout recommended for your disk. Suggested partitioning should be suitable for most installations, simply accept it.
Make sure you configure two network interfaces. You will be asked to choose internal and external interfaces later on.
All of the install sets and software packages are selected by default, simply accept the selections. If you are upgrading, you will notice that a few packages are deselected. However, you are advised to include them among the selections by hitting ENTER a couple of times.
If the installation script finds an already existing file which needs to be updated, it saves the old file as <filename>.orig. To update all such files, accept the default ‘a(chǎn)’ answer when asked.
Installation logs can be found under the /root directory.
You can access the web administration interface using the IP address of the system’s internal interface you have selected during installation. You can log in to the system over ssh from internal network.
Web interface user names are admin and user. Both are set to the same password you have provided during installation.
References:
[1] See http://openbsd.org/amd64.html and http://openbsd.org/i386.html for supported hardware.
[2] See http://openbsd.org/faq/faq4.html for OpenBSD installation instructions.
$ComixWall: InstallationGuide.txt,v 1.10 2009/12/04 08:58:10 soner Exp $
![]()
來自：http://www.dugoo.net/wordpress/?p=769
|
|
免費注冊
發(fā)表于 2009-12-13 11:34
前排？？
瞻仰一下儀容。