SUN STK6540 升級firmware問題

glfeng

昨天給用戶升級SUN STK6540 升級firmware，版本06.19.**----06.60.20.**，
過程中出了錯，沒有升過去，控制器有黃燈告警，就是“！”的燈告警，
報錯如下:Event log issues:
            Too many critical events logged
            Too many destination driver events

除了用CAM，好有其他方法嗎？
謝謝各位大俠了！�。。。。。。。�

以下是log：
[Aug 12, 2009 3:33:45 PM] [upgrade utility] [application] [application start up]
Application started: 8/12/09 3:33 PM

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address /200.10.10.207 started

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Started to contact symbol server for IP address /200.10.10.207

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address /200.10.10.206 started

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Started to contact symbol server for IP address /200.10.10.206

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully contacted the symbol server for IP address /200.10.10.207

[Aug 12, 2009 3:34:53 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully contacted the symbol server for IP address /200.10.10.206

[Aug 12, 2009 3:34:54 PM] [upgrade utility] [EMW] [Array Discovery]
Symbol client successfully bound to controller and retrieved SAData for network address /200.10.10.206

[Aug 12, 2009 3:34:54 PM] [upgrade utility] [EMW] [Array Discovery]
Symbol client successfully bound to controller and retrieved SAData for network address /200.10.10.207

[Aug 12, 2009 3:35:01 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully started the facade for the device at network address 200.10.10.206/200.10.10.206

[Aug 12, 2009 3:35:01 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address 200.10.10.206/200.10.10.206 ended

[Aug 12, 2009 3:35:02 PM] [upgrade utility] [EMW] [Array Discovery]
Successfully started the facade for the device at network address 200.10.10.207/200.10.10.207

[Aug 12, 2009 3:35:02 PM] [upgrade utility] [EMW] [Array Discovery]
Discovery of the device for address 200.10.10.207/200.10.10.207 ended

[Aug 12, 2009 3:35:09 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller A

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller B

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check firmware version]
Test passed

[Aug 12, 2009 3:35:11 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller A

[Aug 12, 2009 3:35:13 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller A

[Aug 12, 2009 3:35:13 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller B

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller B

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check drives]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check volume groups]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check hot spares]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check current operations]
Exclusive operation: One or more exclusive operations are in progress. The operations must complete before the firmware can be upgraded. Use the storage manager software to monitor the progress of the operation(s).

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check volumes]
Test passed

[Aug 12, 2009 3:35:15 PM] [FC-SATA6540] [pre-upgrade tests] [check dac store]
Test passed

[Aug 12, 2009 3:35:17 PM] [FC-SATA6540] [pre-upgrade tests] [check internal data validity]
Test passed

[Aug 12, 2009 3:35:37 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
The event log has not been cleared within the last 24 hours.

[Aug 12, 2009 3:35:42 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
Event log verification error: You cannot upgrade the storage array until the problem is resolved. Contact your technical support representative to resolve this issue.

Event log issues:
Too many critical events logged
Too many destination driver events

[Aug 12, 2009 3:35:42 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 32s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests start]
Pre-upgrade tests started

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller A

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check controller type]
Test passed - controller B

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check firmware version]
Test passed

[Aug 12, 2009 3:53:01 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller A

[Aug 12, 2009 3:53:03 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller A

[Aug 12, 2009 3:53:03 PM] [FC-SATA6540] [pre-upgrade tests] [check controller state]
Test passed - controller B

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check spm database]
Test passed - controller B

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check drives]
Test passed

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check volume groups]
Test passed

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check hot spares]
Test passed

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check current operations]
Exclusive operation: One or more exclusive operations are in progress. The operations must complete before the firmware can be upgraded. Use the storage manager software to monitor the progress of the operation(s).

[Aug 12, 2009 3:53:04 PM] [FC-SATA6540] [pre-upgrade tests] [check volumes]
Test passed

[Aug 12, 2009 3:53:05 PM] [FC-SATA6540] [pre-upgrade tests] [check dac store]
Test passed

[Aug 12, 2009 3:53:07 PM] [FC-SATA6540] [pre-upgrade tests] [check internal data validity]
Test passed

[Aug 12, 2009 3:53:32 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
The event log has not been cleared within the last 24 hours.

[Aug 12, 2009 3:53:37 PM] [FC-SATA6540] [pre-upgrade tests] [check event log]
Event log verification error: You cannot upgrade the storage array until the problem is resolved. Contact your technical support representative to resolve this issue.

Event log issues:
Too many critical events logged
Too many destination driver events

[Aug 12, 2009 3:53:37 PM] [FC-SATA6540] [pre-upgrade tests] [pre-upgrade tests complete] [0h 0m 35s]
Pre-upgrade test(s) failure - the storage array cannot be upgraded in its present state

easybegin

停止I/O，確認cache中沒有活動的東西！然后再升級。

glfeng

回樓上，并補充：
沒有IO，是在主機沒有開機的情況下做的升級，
是不是需要更高版本的CAM？

easybegin

Exclusive operation: One or more exclusive operations are in progress. The operations must complete before the firmware can be upgraded. Use the storage manager software to monitor the progress of the operation(s).

還是再檢查一下吧，提示用軟件監控進程：“Use the storage manager software to monitor the progress of the operation（s）�！�

fireware

你用的ＣＡＭ的版本是正確的嗎，在升級之前會有一些對比與檢查．都正確嗎？
從日志上看，是在檢查完后，有問題不能升級，能貼出，現在的event log? 看是什么攝氏．

xiazhen9842

我想LZ,你能不能清一下你的控制器的LOG。清除之前，先另存一下。然后再進行升級。還有你不能用太高的CAM。它可能會直接給你升級到7的版本。那樣你就完了。因?yàn)?的版本和6版有很大的差異的。升級到7之后以前的卷信息可能會變。還有升級之前最好全備一下數據。

glfeng

回6樓，
控制器的log怎么清除？在CAM里面? 還是接串口進去用命令，請明示，謝謝.

Guptill

原帖由 xiazhen9842 于 2009-8-13 17:32 發表
我想LZ,你能不能清一下你的控制器的LOG。清除之前，先另存一下。然后再進行升級。還有你不能用太高的CAM。它可能會直接給你升級到7的版本。那樣你就完了。因?yàn)?的版本和6版有很大的差異的。升級到7之后以前的卷 ...

就是你想直接升級到7，那么CAM也不會幫你做的。6.xx只能升級到6.60，如果需要到7.x，那么需要使用專門的升級工具，呵呵。