- 論壇徽章:
- 0
|
回復 #16 ziggler 的帖子
終于搞定了,參看:
I didn't get to try to install BT2 on my USB, I got it working before.
When following the guide from pendrivelinux com I downloaded the newest version of syslinux ver. 3.60 from kernel org/pub/linux/utils/boot/syslinux/
So I tried updating the syslinux files from BT3b to the newest version, and behold! BT3b boots from both my USB flash drives.
So the developers should be noted to update the syslinux in the next release of BT3. And ppl with problems getting their USB drive to boot should try updating it manually by replacing these three files:
boot/syslinux/syslinux
boot/syslinux/syslinux.exe
boot/syslinux/syslinux.com
Also it should be noted that to save the changes I had to point to a file (like dev/sdb2/changes.dat) and not just to dev/sdb2/
不過在HP的機器上可以USB啟動,但是在IBM的機器上卻啟動不了,相同的USB啟動盤;需要繼續研究;
昨天晚上:
有一個信號很好的無線信號,用BT3破譯了密碼,但是連接時提示“windows無法連接到選定網絡 網絡可能不在區域中。不知道是何原因?
http://www.wlanbbs.com/thread-22720-1-1.html 這里也是遇到了相同的問題;
在首選網絡項目下面添加這個網絡,輸入SSID,驗證選擇共享式,手動輸入密碼,應該就可以了!不知道這樣是否可行,晚上再試驗一下。
http://www.ccw.com.cn/oa/xp/htm2008/20080905_496939.shtml
[ 本帖最后由 ziggler 于 2009-8-4 09:25 編輯 ] |
|