ports安裝rrdtool出錯，請指教!

hotgoo

最小化方式安裝freebsd7.0，更新了ports tree;
ports安裝rrdtool出錯,提示如下：

tester# make install clean
===>   rrdtool-1.3.3 depends on executable: gmake - found
===>   rrdtool-1.3.3 depends on file: /usr/local/bin/perl5.8.8 - found
===>   rrdtool-1.3.3 depends on file: /usr/local/bin/libtool - found
===>   rrdtool-1.3.3 depends on shared library: freetype.9 - found
===>   rrdtool-1.3.3 depends on shared library: cairo.2 - found
===>   rrdtool-1.3.3 depends on shared library: png.5 - found
===>   rrdtool-1.3.3 depends on shared library: xml2.5 - found
===>   rrdtool-1.3.3 depends on shared library: pangocairo-1.0.0 - not found
===>    Verifying install for pangocairo-1.0.0 in /usr/ports/x11-toolkits/pango
===>  Installing for pango-1.18.3
===>   pango-1.18.3 depends on file: /usr/local/lib/X11/fonts/TTF/luximb.ttf - not found
===>    Verifying install for /usr/local/lib/X11/fonts/TTF/luximb.ttf in /usr/ports/x11-fonts/xorg-fonts-truetype
"Makefile", line 33: Malformed conditional (${X_WINDOW_SYSTEM:L} != xorg)
"Makefile", line 37: if-less endif
make: fatal errors encountered -- cannot continue
*** Error code 1

Stop in /usr/ports/x11-toolkits/pango.
*** Error code 1

Stop in /usr/ports/databases/rrdtool.
*** Error code 1

Stop in /usr/ports/databases/rrdtool.


看提示好像是什么包沒安裝；
請大家指教，多謝！

smilecat

我剛裝了cacti,也是MINI安裝，不過沒更新ports，rrdtools好像是1.2.X版本，沒遇到任何問題，我也發現很多軟件更新了裝不上，并不是什么軟件都用最新的好，把/usr/ports/distfile清空，然后換個鏡像裝看看，我也遇到過軟件死活裝不上，后來?yè)Q了tw的鏡像站點就裝上了，感覺很多網站維持的軟件包不一樣啊，可能有的網站的包有錯誤，實在不行，你就跟我一樣，裝老版的吧

[ 本帖最后由 smilecat 于 2008-11-17 10:24 編輯 ]

fengyun8972

缺少字體呀，
先上 這里裝一下看看 /usr/ports/x11-fonts/xorg-fonts-truetype

應該得更新一下ports，

不行把字體復制過去 ttfmkdir 一下吧。。。

ziggler

===>   rrdtool-1.3.3 depends on shared library: pangocairo-1.0.0 - not found
===>    Verifying install for pangocairo-1.0.0 in /usr/ports/x11-toolkits/pango
===>  Installing for pango-1.18.3
===>   pango-1.18.3 depends on file: /usr/local/lib/X11/fonts/TTF/luximb.ttf - not found
===>    Verifying install for /usr/local/lib/X11/fonts/TTF/luximb.ttf in /usr/ports/x11-fonts/xorg-fonts-truetype
"Makefile", line 33: Malformed conditional (${X_WINDOW_SYSTEM:L} != xorg)
"Makefile", line 37: if-less endif

smilecat

我更新了ports試驗裝一下rrdtool1.3.3，也出現問題了，一直沒解決，更新ports怎么那么多問題啊
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LC_ALL = (unset),
        LC_CTYPE = "zh_CN.encCN",
        LANG = (unset)
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Checking if your kit is complete...
Looks good
Unable to find a perl 5 (by these names: /usr/bin/perl perl perl5 perl5.8.8 miniperl, in these dirs: /sbin /bin /usr/sbin /usr/bin /usr/games /usr/local/sbin /usr/local/bin /root/bin /usr/local/bin)
Writing Makefile for RRDp
cd perl-piped && gmake
gmake[4]: Entering directory `/usr/ports/databases/rrdtool/work/rrdtool-1.3.3/bindings/perl-piped'
/usr/ports/databases/rrdtool/work/rrdtool-1.3.3/bindings/perl-piped/0: not found
gmake[4]: *** [blib/lib/.exists] Error 127
gmake[4]: Leaving directory `/usr/ports/databases/rrdtool/work/rrdtool-1.3.3/bindings/perl-piped'
gmake[3]: *** [perl_piped] Error 2
gmake[3]: Leaving directory `/usr/ports/databases/rrdtool/work/rrdtool-1.3.3/bindings'
gmake[2]: *** [all-recursive] Error 1
gmake[2]: Leaving directory `/usr/ports/databases/rrdtool/work/rrdtool-1.3.3/bindings'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/usr/ports/databases/rrdtool/work/rrdtool-1.3.3'
gmake: *** [all] Error 2
*** Error code 2
哪位大哥順便幫我看看，難道是我修改了.cshrc的緣故么！我沒更新ports之前是不會出現這個錯誤的，
      LC_ALL = (unset),   
        LC_CTYPE = "zh_CN.encCN",
        LANG = (unset)         很多帖子說改這里，到底應該怎么改？？

[ 本帖最后由 smilecat 于 2008-11-17 15:28 編輯 ]

fengyun8972

原帖由 smilecat 于 2008-11-17 15:24 發表
我更新了ports試驗裝一下rrdtool1.3.3，也出現問題了，一直沒解決，更新ports怎么那么多問題啊
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
        LC ...

是  zh_CN.eucCN  not   zh_CN.encCN

smilecat

原帖由 fengyun8972 于 2008-11-18 17:06 發表

是  zh_CN.eucCN  not   zh_CN.encCN

我試試，這個地方我又沒改，難道升級了PORTS就變了

smilecat

暈，真的是這個問題，謝謝，太奇怪了！郁悶