各位大哥大姐:
兩臺N 1405做的雙機,其中一臺down掉就再也起不來啦!報的信息如下,跑POST不順利,有見過同樣問題的難友沒,速速救救小弟。要不然奧運結束了我都回不了北平啊!可能是雙機上的軟件引起的系統驚慌!
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-19 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
WARNING: forceload of drv/scsi failed
obpsym: symbolic debugging is available.
WARNING: forceload of drv/pci failed
panic: failed to stop cpu2
panic[cpu1]/thread=2a10007dd20: send mondo timeout (target 0x2) [736405 NACK 0 BUSY]
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetting ...
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Netra t 1400/1405 (2 X UltraSPARC-II 440MHz), No Keyboard
OpenBoot 3.29, 1024 MB memory installed, Serial #51544812.
Ethernet address 0:3:ba:12:82:ec, Host ID: 831282ec.
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-19 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
WARNING: forceload of drv/scsi failed
obpsym: symbolic debugging is available.
WARNING: forceload of drv/pci failed
panic: failed to stop cpu2
panic[cpu1]/thread=2a10007dd20: send mondo timeout (target 0x2) [745096 NACK 1 BUSY]