請教大家，LP8000 HBA卡問題

臉都不洗

用cfgadm -al 可以看到兩張HBA卡已經配置，如下
pcisch0:hpc1_slot0             pci-pci/hp   connected    configured   ok
pcisch0:hpc1_slot1             vgs8514/hp   connected    configured   ok
pcisch0:hpc1_slot2             unknown      empty        unconfigured unknown
pcisch0:hpc1_slot3             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot4             fibre/hp     connected    configured   ok
pcisch2:hpc2_slot5             unknown      empty        unconfigured unknown
pcisch2:hpc2_slot6             unknown      empty        unconfigured unknown
pcisch3:hpc0_slot7             unknown      empty        unconfigured unknown
pcisch3:hpc0_slot8             fibre/hp     connected    configured   ok

用prtdiag也可以看到
I/O  PCI   9    B    4    33   33  4,0  ok    lpfc-pci10df,f800/sd (block)      LP8000               
I/O  PCI   9    A    8    33   66  1,0  ok    lpfc-pci10df,f800/sd (block)      LP8000  

問題：
但是使用luxadm 只能看到一張
    Found path to 1 HBA ports

/devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl                     CONNECTED


已經使用  lputil進行配置過， lputil菜單中可以看到兩張HBA卡，均正常。在但未果兩張卡型號及微碼均一樣，并且已經升級。而st.conf等其他配置文件都查看過。

分析
   1.一張卡已經正常工作，應該與驅動無關.
   2.卡已經重新配置過，同時更換過槽位，卡是好的。
   3.系統補丁已經升級，重啟過

使用用luxadm 只能看到一張
/devices/pci@8,600000/SUNW,qlc@2/fp@0,0:devctl                     CONNECTED

望大家?guī)兔�看看，謝謝

bencyber

把messages中的內容也帖上來看看。

臉都不洗

謝謝，日志內容。麻煩了
11 16:33:47 v880yz smt: [ID 272566 kern.notice] smt0: nf FDDI driver is not active.  Initialization of this driver cannot be com
pleted.
Jun 11 16:33:47 v880yz mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver confi
guration file.
Jun 11 16:34:08 v880yz lpfc: [ID 280502 kern.info] NOTICE: lpfc0:039:Cannot issue FCP command  Data: ffffffff 0 0 0
Jun 11 18:06:42 v880yz lpfc: [ID 280502 kern.info] NOTICE: lpfc0:039:Cannot issue FCP command  Data: ffffffff 0 0 0
Jun 11 18:07:38 v880yz last message repeated 8 times
Jun 11 18:07:47 v880yz smt: [ID 272566 kern.notice] smt0: nf FDDI driver is not active.  Initialization of this driver cannot be com
pleted.
Jun 11 18:07:47 v880yz mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver confi
guration file.
Jun 11 18:08:10 v880yz lpfc: [ID 280502 kern.info] NOTICE: lpfc0:039:Cannot issue FCP command  Data: ffffffff 0 0 0
Jun 11 18:12:43 v880yz smt: [ID 272566 kern.notice] smt0: nf FDDI driver is not active.  Initialization of this driver cannot be com
pleted.
Jun 11 18:12:43 v880yz mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver confi
guration file.
Jun 11 18:20:07 v880yz smt: [ID 272566 kern.notice] smt0: nf FDDI driver is not active.  Initialization of this driver cannot be com
pleted.
Jun 11 18:20:07 v880yz mpxio: [ID 497178 kern.info] /scsi_vhci (scsi_vhci0) multipath capabilities are disabled through driver confi
guration file.

今天
Aug 14 14:55:19 v880yz gab: [ID 495678 kern.notice] GAB:20036: Port a gen 14670e5f membership 012
Aug 14 14:55:19 v880yz gab: [ID 755490 kern.notice] GAB:20037: Port a gen 14670e5f   jeopardy ; 2
Aug 14 14:55:25 v880yz gab: [ID 495678 kern.notice] GAB:20036: Port a gen 14670e5f membership 012