那位老大指點一下Cisco Works2000的配置

yhd8980

設置Campus Manager 3.1 登錄網管系統。選擇菜單“Server Configuration”-“Setup”-“ANI Server Admin”-“SNMP Settings”，對照說明將腳本中的Read及Write Community String更改為本網中使用的值。

我的路由器地址：10.129.0.98
snmp配置：

snmp-server community nms RO
snmp-server community yhd RW
snmp-server location NEIMEN
snmp-server contact person tel: 04716269449
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps bgp


那這個腳本應當啥寫：
# Enter the community string using this syntax:
#       target:read_community::timeout:retries:::write_community
#
# You must be sure to keep the correct number of colons between entries.
# If you add or delete colons,  the ANI Server will NOT be able to properly read the community strings.
#
# To verify that you are entering valid community strings, use the online help for guidance.

target:read_community::::::write_community
多謝指教。