- 論壇徽章:
- 0
|
最新情況：
我開機按下了STOP+D，然后串口就輸出以下：
Hardware Power ON
@(#) Sun Ultra 5/10 UPA/PCI 3.11 Version 9 created 1998/03/06 10:31
Probing keyboard Done
%o0 = 0000.0000.0000.4001
Executing Power On SelfTest
@(#) Sun Ultra 5/10 (Darwin) POST 2.2.9 (Build No. 502) 17:54 on 02/19/98
CPU: UltraSPARC-LC (MHz: 271 Ecache Size: 256KB)
Init POST BSS
Init System BSS
NVRAM
NVRAM Battery Detect Test
NVRAM Scratch Addr Test
NVRAM Scratch Data Test
DMMU TLB Tags
DMMU TLB Tag Access Test
DMMU TLB RAM
DMMU TLB RAM Access Test
Probe Ecache
Probe Ecache
Ecache Tests
Ecache RAM Addr Test
Ecache Tag Addr Test
Ecache RAM Test
Ecache Tag Test
All CPU Basic Tests
V9 Instruction Test
CPU Tick and Tick Compare Reg Test
CPU Soft Trap Test
CPU Softint Reg and Int Test
All Basic MMU Tests
DMMU Primary Context Reg Test
DMMU Secondary Context Reg Test
DMMU TSB Reg Test
DMMU Tag Access Reg Test
DMMU VA Watchpoint Reg Test
DMMU PA Watchpoint Reg Test
IMMU TSB Reg Test
IMMU Tag Access Reg Test
All Basic Cache Tests
Dcache RAM Test
Dcache Tag Test
Icache RAM Test
Icache Tag Test
Icache Next Test
Icache Predecode Test
Sabre MCU Control & Status Regs Init and Tests
Init Sabre MCU Control & Status Regs
Initializing SC registers in SabreIO
Memory Probe and Init
Probe Memory
INFO: 128MB Bank 0
bank 2: 0MB
INFO: MC0 = 0x00000000.80001184, MC1 = 0x00000000.06459acb
Ecache Access Test
Malloc Post Memory
Memory Addr with Ecache
Load Post In Memory
Run POST from MEM
.........
loaded POST in memory
Map PROM/STACK/NVRAM in DMMU
Update Master Stack/Frame Pointers
All FPU Basic Tests
FPU Regs Test
FPU Move Regs Test
FPU State Reg Test
FPU Functional Test
FPU Trap Test
UPA Data Bus Line Test
Memory Tests
Init Memory
INFO: 128MB at bank 0 stack 0 (2 dimms per bank)
........................................................................................................................
INFO: 0MB at bank 0 stack 1
INFO: 0MB at bank 2 stack 0
INFO: 0MB at bank 2 stack 1
Memory Addr with Ecache Test
INFO: 128MB at bank 0 stack 0 (2 dimms per bank)
INFO: 0MB at bank 0 stack 1
INFO: 0MB at bank 2 stack 0
INFO: 0MB at bank 2 stack 1
ECC Memory Addr Test
INFO: 128MB at bank 0 stack 0 (2 dimms per bank)
INFO: 0MB at bank 0 stack 1
INFO: 0MB at bank 2 stack 0
INFO: 0MB at bank 2 stack 1
Block Memory Addr Test
INFO: 128MB at bank 0 stack 0 (2 dimms per bank)
INFO: 0MB at bank 0 stack 1
INFO: 0MB at bank 2 stack 0
INFO: 0MB at bank 2 stack 1
Block Memory Test
INFO: 128MB at bank 0 stack 0 (2 dimms per bank)
Write 0x33333333.33333333 ........................................................................................................................
Read ........................................................................................................................
Write 0x55555555.55555555 ........................................................................................................................
Read ........................................................................................................................
Write 0xcccccccc.cccccccc ........................................................................................................................
Read ........................................................................................................................
Write 0xaaaaaaaa.aaaaaaaa ........................................................................................................................
Read ........................................................................................................................
INFO: 0MB at bank 0 stack 1
INFO: 0MB at bank 2 stack 0
INFO: 0MB at bank 2 stack 1
ECC Blk Memory Test
INFO: 128MB at bank 0 stack 0 (2 dimms per bank)
Write 0xa5a5a5a5.a5a5a5a5 ........................................................................................................................
Read ........................................................................................................................
Write 0x96969696.96969696 ........................................................................................................................
Read ........................................................................................................................
Write 0xbbbbbbbb.bbbbbbbb ........................................................................................................................
Read ........................................................................................................................
Write 0xdddddddd.dddddddd ........................................................................................................................
Read ........................................................................................................................
INFO: 0MB at bank 0 stack 1
INFO: 0MB at bank 2 stack 0
INFO: 0MB at bank 2 stack 1
All Basic Sabre MMU Tests
Init Sabre
PIO Decoder and BCT Test
PCI Byte Enable Test
Interrupt Map (short) Reg Test
Interrupt Set/Clr Reg Test
Sabre IOMMU Regs Test
Sabre IOMMU RAM Address Test
Sabre IOMMU CAM Address Test
IOMMU TLB Compare Test
IOMMU TLB Flush Test
PBMA PCI Config Space Regs Test
PBMA Control/Status Reg Test
PBMA Diag Reg Test
Sabre IO Regs Test
All Advanced CPU Tests
DMMU Hit/Miss Test
IMMU Hit/Miss Test
DMMU Little Endian Test
IU ASI Access Test
FPU ASI Access Test
Ecache Thrash Test
All CPU Error Reporting Tests
CPU Data Access Trap Test
CPU Addr Align Trap Test
DMMU Access Priv Page Test
DMMU Write Protected Page Test
All Advanced Sabre IOMMU Tests
Init Sabre
Consist DMA Rd, IOMMU miss Ebus Test
Consist DMA Rd, IOMMU hit Ebus Test
Consist DMA Wr, IOMMU miss Ebus Test
Consist DMA Wr, IOMMU hit Ebus Test
Pass-Thru DMA Rd, Ebus device Test
Pass-Thru DMA Wr, Ebus device Test
Consist DMA Rd, IOMMU LRU Lock Ebus Test
Consist DMA Wr, IOMMU LRU Locked Ebus Test
All Basic Cheerio Tests
Cheerio Ebus PCI Config Space Test
Cheerio Ethernet PCI Config Space Test
Cheerio Init
All Sabre IOMMU Error Reporting Tests
Init Sabre
PIO Read, Master Abort Test
PIO Read, Target Abort Test
Status of this POST run: PASS
manfacturing mode=OFF
Time Stamp [hour:min:sec] 14:41:27 [month/date year] 09/22 2006
Power On Selftest Completed
Software Power ON0.0000.0000.0000 ffff.ffff.f00b.4448 0002.3333.0200.001b
@(#) Sun Ultra 5/10 UPA/PCI 3.11 Version 9 created 1998/03/06 10:31
Clearing E$ Tags Done
Clearing I/D TLBs Done
Probing Memory Done
MEM BASE = 0000.0000.0000.0000
MEM SIZE = 0000.0000.0800.0000
11-Column Mode Enabled
MMUs ON
Copy Done
PC = 0000.01ff.f000.1ffc
PC = 0000.0000.0000.2040
Decompressing into Memory Done
Size = 0000.0000.0006.e160
ttya initialized
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi 2-2-2 module
Probing Memory Bank #0 64 + 64 : 128 Megabytes
Probing Memory Bank #2 0 + 0 : 0 Megabytes
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 pci108e,1000 network
Probing /pci@1f,0/pci@1,1 at Device 2 SUNW,m64B
Probing /pci@1f,0/pci@1,1 at Device 3 ide disk cdrom
Probing /pci@1f,0/pci@1 at Device 1 Nothing there
Probing /pci@1f,0/pci@1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
Reset Control: BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
UltraSPARC-IIi 2-2-2 module
Probing Memory Bank #0 64 + 64 : 128 Megabytes
Probing Memory Bank #2 0 + 0 : 0 Megabytes
Probing UPA Slot at 1e,0 Nothing There
Probing /pci@1f,0/pci@1,1 at Device 1 pci108e,1000 network
Probing /pci@1f,0/pci@1,1 at Device 2 SUNW,m64B
Probing /pci@1f,0/pci@1,1 at Device 3 ide disk cdrom
Probing /pci@1f,0/pci@1 at Device 1 Nothing there
Probing /pci@1f,0/pci@1 at Device 2 Nothing there
Probing /pci@1f,0/pci@1 at Device 3 Nothing there
Probing /pci@1f,0/pci@1 at Device 4 Nothing there
Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 270MHz), No Keyboard
OpenBoot 3.11, 128 MB memory installed, Serial #9840094.
Ethernet address 8:0:20:96:25:de, Host ID: 809625de.
Boot device: net File and args:
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Timeout waiting for ARP/RARP packet
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Timeout waiting for ARP/RARP packet
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
AutoNegotiation Timeout.
Check Cable or Contact your System Administrator.
Link Down.
Network Link Setup Failed.
Please Check Cable and Try Again.
Timeout waiting for ARP/RARP packet
Setting up Network Link and Speed.
Using Onboard Transceiver - Timeout waiting for AutoNegotiation Status to be updated.
Timeout reading Link status. Check cable and try again.
Timeout waiting for AutoNegotiation Status to be updated. |
|
免費注冊
樓主: roman_pan
發表于 2006-09-22 20:26
