fastDFS使用怪現象，實在找不到答案，跪求�。�！

skymelai

新建了一個fastDFS的系統，
很簡單： 一個tracker 一個group(兩個storage),tracker地址:192.168.200.199，storage1地址：192.168.200.220，storage2地址：192.168.200.240
tracker和storage都正常啟動，日志等均無錯誤顯示。能正常上傳文件，且兩個storage都上傳成功。
使用fdfs_download_file也能下載文件。

問題：
  我每次使用fdfs_download_file下載文件時tracker返回給我的storage一直是storage1（我在fdfs_download_file中把tracker返回給我的storage的IP地址打印出來看），無論我下載多少次都是這樣，而且我還嘗試運行多個fdfs_download_file進行同時下載，還有就是多臺客戶端電腦同時下載，結果都相同。我能確保storage2是正常工作的，因?yàn)槲沂謩?dòng)關閉storage1后用fdfs_download_file去下載時tracker返回給我的storage變成了storage2。我也反復檢查了我的配置和這個問題相關的參數就只有tracker.conf中的download_server=0，# 0: 輪詢方式，可以下載當前文件的任一storage server

實在是沒有辦法，跪求幫助�。。�！

skymelai

按理說參數download_server=0，那tracker應該進行輪詢的負載均衡啊，現在它總是只返回storage1

skymelai

大家不要只看啊，給出出主意唄！

skymelai

tracker.conf配置內容：

# is this config file disabled
# false for enabled
# true for disabled
disabled=false

# bind an address of this host
# empty for bind all addresses of this host
bind_addr=

# the tracker server port
port=22122

# connect timeout in seconds
# default value is 30s
connect_timeout=30

# network timeout in seconds
# default value is 30s
network_timeout=60

# the base path to store data and log files
base_path=/home/fastdfs_data

# max concurrent connections this server supported
max_connections=256

# accept thread count
# default value is 1
# since V4.07
accept_threads=1

# work thread count, should <= max_connections
# default value is 4
# since V2.00
work_threads=4

# the method of selecting group to upload files
# 0: round robin
# 1: specify group
# 2: load balance, select the max free space group to upload file
store_lookup=2

# which group to upload file
# when store_lookup set to 1, must set store_group to the group name
store_group=group2

# which storage server to upload file
# 0: round robin (default)
# 1: the first server order by ip address
# 2: the first server order by priority (the minimal)
store_server=0

# which path(means disk or mount point) of the storage server to upload file
# 0: round robin
# 2: load balance, select the max free space path to upload file
store_path=0

# which storage server to download file
# 0: round robin (default)
# 1: the source storage server which the current file uploaded to
download_server=0

# reserved storage space for system or other applications.
# if the free(available) space of any stoarge server in
# a group <= reserved_storage_space,
# no file can be uploaded to this group.
# bytes unit can be one of follows:
### G or g for gigabyte(GB)
### M or m for megabyte(MB)
### K or k for kilobyte(KB)
### no unit for byte(B)
### XX.XX% as ratio such as reserved_storage_space = 10%
reserved_storage_space = 10%

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info

#unix group name to run this program,
#not set (empty) means run by the group of current user
run_by_group=

#unix username to run this program,
#not set (empty) means run by current user
run_by_user=

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" (only one asterisk) means match all ip addresses
# we can use CIDR ips like 192.168.5.64/26
# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
# for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
# allow_hosts=192.168.5.64/26
allow_hosts=*

# sync log buff to disk every interval seconds
# default value is 10 seconds
sync_log_buff_interval = 10

# check storage server alive interval seconds
check_active_interval = 120

# thread stack size, should >= 64KB
# default value is 64KB
thread_stack_size = 64KB

# auto adjust when the ip address of the storage server changed
# default value is true
storage_ip_changed_auto_adjust = true

# storage sync file max delay seconds
# default value is 86400 seconds (one day)
# since V2.00
storage_sync_file_max_delay = 86400

# the max time of storage sync a file
# default value is 300 seconds
# since V2.00
storage_sync_file_max_time = 300

# if use a trunk file to store several small files
# default value is false
# since V3.00
use_trunk_file = false

# the min slot size, should <= 4KB
# default value is 256 bytes
# since V3.00
slot_min_size = 256

# the max slot size, should > slot_min_size
# store the upload file to trunk file when it's size <=  this value
# default value is 16MB
# since V3.00
slot_max_size = 16MB

# the trunk file size, should >= 4MB
# default value is 64MB
# since V3.00
trunk_file_size = 64MB

# if create trunk file advancely
# default value is false
# since V3.06
trunk_create_file_advance = false

# the time base to create trunk file
# the time format: HH:MM
# default value is 02:00
# since V3.06
trunk_create_file_time_base = 02:00

# the interval of create trunk file, unit: second
# default value is 38400 (one day)
# since V3.06
trunk_create_file_interval = 86400

# the threshold to create trunk file
# when the free trunk file size less than the threshold, will create
# the trunk files
# default value is 0
# since V3.06
trunk_create_file_space_threshold = 20G

# if check trunk space occupying when loading trunk free spaces
# the occupied spaces will be ignored
# default value is false
# since V3.09
# NOTICE: set this parameter to true will slow the loading of trunk spaces
# when startup. you should set this parameter to true when neccessary.
trunk_init_check_occupying = false

# if ignore storage_trunk.dat, reload from trunk binlog
# default value is false
# since V3.10
# set to true once for version upgrade when your version less than V3.10
trunk_init_reload_from_binlog = false

# the min interval for compressing the trunk binlog file
# unit: second
# default value is 0, 0 means never compress
# FastDFS compress the trunk binlog when trunk init and trunk destroy
# recommand to set this parameter to 86400 (one day)
# since V5.01
trunk_compress_binlog_min_interval = 0

# if use storage ID instead of IP address
# default value is false
# since V4.00
use_storage_id = false

# specify storage ids filename, can use relative or absolute path
# since V4.00
storage_ids_filename = storage_ids.conf

# id type of the storage server in the filename, values are:
## ip: the ip address of the storage server
## id: the server id of the storage server
# this paramter is valid only when use_storage_id set to true
# default value is ip
# since V4.03
id_type_in_filename = ip

# if store slave file use symbol link
# default value is false
# since V4.01
store_slave_file_use_link = false

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0

# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0

# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false

# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600

# HTTP port on this tracker server
http.server_port=8080

# check storage HTTP server alive interval seconds
# <= 0 for never check
# default value is 30
http.check_alive_interval=30

# check storage HTTP server alive type, values are:
#   tcp : connect to the storge server with HTTP port only,
#        do not request and get response
#   http: storage check alive url must return http status 200
# default value is tcp
http.check_alive_type=tcp

# check storage HTTP server alive uri/url
# NOTE: storage embed HTTP server support uri: /status.html
http.check_alive_uri=/status.html

skymelai

storage.conf內容：

# is this config file disabled
# false for enabled
# true for disabled
disabled=false

# the name of the group this storage server belongs to
#
# comment or remove this item for fetching from tracker server,
# in this case, use_storage_id must set to true in tracker.conf,
# and storage_ids.conf must be configed correctly.
group_name=group1

# bind an address of this host
# empty for bind all addresses of this host
bind_addr=

# if bind an address of this host when connect to other servers
# (this storage server as a client)
# true for binding the address configed by above parameter: "bind_addr"
# false for binding any address of this host
client_bind=true

# the storage server port
port=23000

# connect timeout in seconds
# default value is 30s
connect_timeout=30

# network timeout in seconds
# default value is 30s
network_timeout=60

# heart beat interval in seconds
heart_beat_interval=30

# disk usage report interval in seconds
stat_report_interval=60

# the base path to store data and log files
base_path=/home/fastdfs/fastdfs_log

# max concurrent connections the server supported
# default value is 256
# more max_connections means more memory will be used
max_connections=256

# the buff size to recv / send data
# this parameter must more than 8KB
# default value is 64KB
# since V2.00
buff_size = 256KB

# accept thread count
# default value is 1
# since V4.07
accept_threads=1

# work thread count, should <= max_connections
# work thread deal network io
# default value is 4
# since V2.00
work_threads=4

# if disk read / write separated
##  false for mixed read and write
##  true for separated read and write
# default value is true
# since V2.00
disk_rw_separated = true

# disk reader thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_reader_threads = 1

# disk writer thread count per store base path
# for mixed read / write, this parameter can be 0
# default value is 1
# since V2.00
disk_writer_threads = 1

# when no entry to sync, try read binlog again after X milliseconds
# must > 0, default value is 200ms
sync_wait_msec=50

# after sync a file, usleep milliseconds
# 0 for sync successively (never call usleep)
sync_interval=0

# storage sync start time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00

# storage sync end time of a day, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59

# write to the mark file after sync N files
# default value is 500
write_mark_file_freq=500

# path(disk or mount point) count, default value is 1
store_path_count=1

# store_path#, based 0, if store_path0 not exists, it's value is base_path
# the paths must be exist
store_path0=/home/fastdfs/fastdfs_data
#store_path1=/home/yuqing/fastdfs2

# subdir_count  * subdir_count directories will be auto created under each
# store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path=256

# tracker_server can ocur more than once, and tracker_server format is
#  "host:port", host can be hostname or ip address
tracker_server=192.168.200.199:22122

#standard log level as syslog, case insensitive, value list:
### emerg for emergency
### alert
### crit for critical
### error
### warn for warning
### notice
### info
### debug
log_level=info

#unix group name to run this program,
#not set (empty) means run by the group of current user
run_by_group=

#unix username to run this program,
#not set (empty) means run by current user
run_by_user=

# allow_hosts can ocur more than once, host can be hostname or ip address,
# "*" (only one asterisk) means match all ip addresses
# we can use CIDR ips like 192.168.5.64/26
# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
# for example:
# allow_hosts=10.0.1.[1-15,20]
# allow_hosts=host[01-08,20-25].domain.com
# allow_hosts=192.168.5.64/26
allow_hosts=*

# the mode of the files distributed to the data path
# 0: round robin(default)
# 1: random, distributted by hash code
file_distribute_path_mode=0

# valid when file_distribute_to_path is set to 0 (round robin),
# when the written file count reaches this number, then rotate to next path
# default value is 100
file_distribute_rotate_count=100

# call fsync to disk when write big file
# 0: never call fsync
# other: call fsync when written bytes >= this bytes
# default value is 0 (never call fsync)
fsync_after_written_bytes=0

# sync log buff to disk every interval seconds
# must > 0, default value is 10 seconds
sync_log_buff_interval=10

# sync binlog buff / cache to disk every interval seconds
# default value is 60 seconds
sync_binlog_buff_interval=10

# sync storage stat info to disk every interval seconds
# default value is 300 seconds
sync_stat_file_interval=300

# thread stack size, should >= 512KB
# default value is 512KB
thread_stack_size=512KB

# the priority as a source server for uploading file.
# the lower this value, the higher its uploading priority.
# default value is 10
upload_priority=10

# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
# multi aliases split by comma. empty value means auto set by OS type
# default values is empty
if_alias_prefix=

# if check file duplicate, when set to true, use FastDHT to store file indexes
# 1 or yes: need check
# 0 or no: do not check
# default value is 0
check_file_duplicate=0

# file signature method for check file duplicate
## hash: four 32 bits hash code
## md5: MD5 signature
# default value is hash
# since V4.01
file_signature_method=hash

# namespace for storing file indexes (key-value pairs)
# this item must be set when check_file_duplicate is true / on
key_namespace=FastDFS

# set keep_alive to 1 to enable persistent connection with FastDHT servers
# default value is 0 (short connection)
keep_alive=0

# you can use "#include filename" (not include double quotes) directive to
# load FastDHT server list, when the filename is a relative path such as
# pure filename, the base path is the base path of current/this config file.
# must set FastDHT server list when check_file_duplicate is true / on
# please see INSTALL of FastDHT for detail
##include /home/yuqing/fastdht/conf/fdht_servers.conf

# if log to access log
# default value is false
# since V4.00
use_access_log = false

# if rotate the access log every day
# default value is false
# since V4.00
rotate_access_log = false

# rotate access log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.00
access_log_rotate_time=00:00

# if rotate the error log every day
# default value is false
# since V4.02
rotate_error_log = false

# rotate error log time base, time format: Hour:Minute
# Hour from 0 to 23, Minute from 0 to 59
# default value is 00:00
# since V4.02
error_log_rotate_time=00:00

# rotate access log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_access_log_size = 0

# rotate error log when the log file exceeds this size
# 0 means never rotates log file by log file size
# default value is 0
# since V4.02
rotate_error_log_size = 0

# keep days of the log files
# 0 means do not delete old log files
# default value is 0
log_file_keep_days = 0

# if skip the invalid record when sync file
# default value is false
# since V4.02
file_sync_skip_invalid_record=false

# if use connection pool
# default value is false
# since V4.05
use_connection_pool = false

# connections whose the idle time exceeds this time will be closed
# unit: second
# default value is 3600
# since V4.05
connection_pool_max_idle_time = 3600

# use the ip address of this storage server if domain_name is empty,
# else this domain name will ocur in the url redirected by the tracker server
http.domain_name=

# the port of the web server on this storage server
http.server_port=8888

duoduoluo_z

大哥，你這個問題我還沒有遇到，因?yàn)槲业纳蟼鬟�沒有成功。。我查不到，你可以幫我看一下嗎？
各軟件版本：
libfastcommon-master
FastDFS V5.05
fastfdfs_nginx_module_master
nginx V1.9.1（后來換成了ngx_openresty-1.7.10.1）

[root@localhost fdfs]# ls
a.txt        http.conf   mod_fastdfs.conf  tracker.conf
client.conf  mime.types  storage.conf

[root@localhost fdfs]# fdfs_upload_file client.conf a.txt
[2016-04-01 10:11:33] ERROR - file: tracker_proto.c, line: 37, server: 192.168.1.9:23000, recv data fail, errno: 107, error info: Transport endpoint is not connected
upload file fail, error no: 107, error info: Transport endpoint is not connected
[root@localhost fdfs]#

配置文件應該沒有問題的，我看了好幾遍。第一次裝的時候上傳成功了，但是第二天我又上傳它就報錯了，而且根據a.txt的內容不一樣 ，報錯也不一樣：

[root@localhost fdfs]# fdfs_upload_file client.conf a.txt
[2016-04-01 10:10:59] ERROR - file: tracker_proto.c, line: 48, server: 192.168.1.9:23000, response status 22 != 0
upload file fail, error no: 22, error info: Invalid argument

storage日志如下：
[2016-04-01 09:51:46] ERROR - file: ../common/sockopt.c, line: 616, bind port 23000 failed, errno: 98, error info: Address already in use.
[2016-04-01 10:10:59] ERROR - file: storage_service.c, line: 1425, client ip: 192.168.1.9, pkg length is not correct, invalid file bytes: 8392585448953743978
[2016-04-01 10:11:33] ERROR - file: storage_service.c, line: 1425, client ip: 192.168.1.9, pkg length is not correct, invalid file bytes: 8392585448953743978

我昨天沒關機，它竟然報端口被占用
這個是空文件上傳報錯日志：
[2016-03-31 19:33:48] ERROR - file: storage_service.c, line: 1373, cmd=11, client ip: 192.168.1.9, package size 15 is not correct, expect length >= 23
[2016-03-31 19:36:09] ERROR - file: storage_service.c, line: 1425, client ip: 192.168.1.9, pkg length is not correct, invalid file bytes: 8392585448953743978

我想也許和nginx的安裝有關吧，我是采用的fdfs + nginx_module + nginx 來裝的，安裝過程沒有報任何錯（應該說都解決了），可是nginx無論如何都啟動不了，報錯如下：
剛剛確認了以下：
[root@localhost logs]#  /usr/local/openresty/nginx/sbin/nginx
/usr/local/openresty/nginx/sbin/nginx: symbol lookup error: /usr/local/openresty/nginx/sbin/nginx: undefined symbol: g_fdfs_base_path

上面這個我是用openresty nginx +lua包安裝的，之前單獨用nginx源碼包安裝，啟動也報這個錯，google后面這個參數都搜不到信息。。
難道和我之前用yum install 安裝過nginx 有關嗎？可是我已經卸載，但是留了一個啟動文件在 /etc/init.d/nginx ，然后直接用
systemctl start nginx 可以啟動成功。。。我真是凌亂了。昨天都不能的

skymelai

回復 6# duoduoluo_z


[2016-04-01 10:11:33] ERROR - file: tracker_proto.c, line: 37, server: 192.168.1.9:23000, recv data fail, errno: 107, error info: Transport endpoint is not connected
upload file fail, error no: 107, error info: Transport endpoint is not connected

這是storage沒有連接成功！
你看看tracker和storage的日志就能找到原因。

skymelai

原因找到了啊，看fdfs負載均衡的代碼找到的，是自己給自己挖了個坑跳
我自己修改了fdfs_download_file.c的代碼，在下載前對文件做了一次文件信息的查詢，
查詢操作使用storage1下載操作使用storage2，因?yàn)槭禽喸兦椅业膅roup中只有2個storage
這樣就導致每次下載后負載均衡又回到原點，這個錯誤提醒我這種輪詢算法的缺點，任何操作（如查詢）
也會做一次負載。

duoduoluo_z

這是storage.log  的信息
[2016-04-05 09:56:42] INFO - file: storage_param_getter.c, line: 225, storage_ip_changed_auto_adjust=1
[2016-04-05 09:56:42] INFO - file: tracker_client_thread.c, line: 257, successfully connect to tracker server 192.168.1.9:22122, as a tracker client, my ip is 192.168.1.9
[2016-04-05 10:00:14] ERROR - file: storage_service.c, line: 1425, client ip: 192.168.1.9, pkg length is not correct, invalid file bytes: 7669743415109681112

第二行已經顯示鏈接成功了，僅僅是tracker 鏈接成功？ 和client 鏈接成功？只有這么多信息了，是storage.conf 的配置問題嗎？

另外看到一個問題：tracker.log 顯示的是     INFO - FastDFS v1.27  可我明明裝的是5.08了，奇怪啊

duoduoluo_z

我用fdfs_test client.conf upload 倉鼠1.jpg 上傳好像成功了：

[root@localhost fdfs]# fdfs_test client.conf upload 倉鼠1.jpg
This is FastDFS client test program v1.27

Copyright (C) 2008, Happy Fish / YuQing

FastDFS may be copied only under the terms of the GNU General
Public License V3, which may be found in the FastDFS source kit.
Please visit the FastDFS Home Page
for more detail.

base_path=/data/fdfs, network_timeout=60, tracker_server_count=1, anti_steal_token=0, anti_steal_secret_key length=0
group_name=group1, ip_addr=192.168.1.9, port=23000
storage_upload_by_filename
group_name=group1, remote_filename=M00/00/00/wKgBCVcDK-kAAAAAAAAcyhXliqg768.jpg
source ip address: 192.168.1.9
file timestamp=2016-04-05 11:07:21
file size=7370
file url: http:、、192.168.1.9/group1/M00/00/00/wKgBCVcDK-kAAAAAAAAcyhXliqg768.jpg
storage_upload_slave_by_filename
group_name=group1, remote_filename=M00/00/00/wKgBCVcDK-kAAAAAAAAcyhXliqg768_big.jpg
source ip address: 192.168.1.9
file timestamp=2016-04-05 11:07:21
file size=7370
file [url]http:、、192.168.1.9/group1/M00/00/00/wKgBCVcDK-kAAAAAAAAcyhXliqg768_big.jpg

但是在瀏覽器里輸入這個地址，得到400 bad Request  
請問這是怎么回事，到底上傳成功了嗎？
V5.08是否是自帶php擴展，如果我用java-client 可以嗎