fdisk 錯誤怎么解決

bbjjqq

用fisk 進行分區，在write的時候報錯

WARNING: Re-reading the partition table failed with error 22: 無效的參數.

jerrywjl

原帖由 bbjjqq 于 2009-10-21 11:30 發表
這個我式了，我是這樣操作的
fdisk /dev/sdb1
o
w
然后還是提示上面的信息

難道不是fdisk /dev/sdb嗎？為什么是fdisk /dev/sdb1呢？！

zyp339025518

How To Fix "Warning: Re-reading the partition table failed with error 22: Invalid argument" Error on Linux
If you are getting the following error while trying to change the default fat32 partition on a new drive to another linux partition type, I might have the answer for you.
This is the error that you keep getting:
WARNING: Re-reading the partition table failed with error 22: Invalid argument.
The kernel still uses the old table.
The new table will be used at the next reboot.
Syncing disks.
Here's the way to fix it, noting that this will wipe your drive. Start up fdisk for the appropriate drive (may not be /dev/sde for you)
fdisk /dev/sde
Then use the "o" option, which according to the menu is:
   o   create a new empty DOS partition table
Now write the changes to disk with "w", and then open up fdisk again. Now you can create your partition.
Don't forget to actually create the filesystem for your new partition, which can be done with "mkfs". You can also use the shortcut method like this:
mkfs.reiserfs /dev/sde1
The nice thing is that the shortcut is easy to type with command line completion.



網上看到的！

bbjjqq

在線等

zyp339025518

這個報錯是不是發生在你將一個fat32的分區格式化成linux分區的時候��？


重啟以后沒有用嗎？“The new table will be used at the next reboot.”這句話有嗎？

[ 本帖最后由 zyp339025518 于 2009-10-21 11:31 編輯 ]

bbjjqq

這個我式了，我是這樣操作的
fdisk /dev/sdb1
o
w
然后還是提示上面的信息

bbjjqq

是的

zyp339025518

哦，只要達到目的就行，沒有圖形分區工具嗎？

bbjjqq

沒用過，linux下有自帶的嗎

zyp339025518

你是什么版本的linux有的，partition  editor就是圖形界面的，還蠻好用的！