SYBASE dbcc

jazy

在進行sp_plan_dbccdb時，我覺得系統是根據某庫所占有的設備數來給出number of worker processes 的推薦值，比如你的生產庫使用了7個設備，那么將給出number of worker processes為7的推薦值！但是實際上你可以多配點，也可以相應的少配點，另外配置改參數需要reboot ASE，所以不可輕易在生產環境中進行修改！另外，在配置命名緩存時也需要進行reboot server!

jimhongchen

I performed all commands needed for creating dbccdb for pubs2.
Why do I have the following error message?
I used "sp_dbcc_evaluatedb" to check and every thing seemed to be ok.

1>; dbcc checkstorage (pubs2)
2>; go
Checking pubs2
Msg 9961, Level 17, State 3:
Line 1:
DBCC failed to connect to the requested number of worker processes. The number of workers configured is insufficient, or the number of workers exceeds 128. Use sp_dbcc_updateconfig to reduce 'max worker processes' for this database.
Msg 9960, Level 20, State 1:
Line 1:
A non-recoverable error has occurred in the CHECKSTORAGE operation. The operation has been aborted.
DBCC CHECKSTORAGE for database 'pubs2' encountered an error. Some results may not be available. Correct the problems reported and reexecute the CHECKSTORAGE command.
1>;
2>; reset
1>; sp_dbcc_evaluatedb
2>; go
Recommended values for workspace size, cache size and process count are:

Database name : pubs2
current scan workspace size : 64K      suggested scan workspace size : 64K
current text workspace size : 48K      suggested text workspace size : 48K
current cache size : 640K      suggested cache size : 640K
current process count : 1      suggested process count : 1


(return status = 0)
1>;

bigbug99

我前面配置都差不多，但執行到這里，怎么報錯了？
1>; dbcc checkstorage(wxjj)
2>; go
Checking wxjj: Logical pagesize is 2048 bytes
Msg 9961, Level 17, State 6:
Server 'wxjj', Line 1:
DBCC failed to connect to the requested number of worker processes. The number
of workers configured is insufficient, or the number of workers exceeds 128. Use
sp_dbcc_updateconfig to reduce 'max worker processes' for this database.
Msg 9960, Level 20, State 1:
Server 'wxjj', Line 1:
A non-recoverable error has occurred in the CHECKSTORAGE operation. The
operation has been aborted.
DBCC CHECKSTORAGE for database 'wxjj' encountered an error. Some results may not
be available. Correct the problems reported and reexecute the CHECKSTORAGE
command.

jazy

很明顯,你們的worker processes 不足!

rekcah0

請問各位大師們:
1.dbcc checkstorage帶不帶fix功能?
2.如果我的系統完全能容忍我任意執行dbcc checkdb,dbcc checkalloc且我對輸出內容的保存方式不敏感的話,dbcc checkstorage還比dbcc checkdb,dbcc checkalloc優越嗎?

bigbug99

我執行第一步結果如下，哪位大蝦幫我搞個好的DBCC方案出來？多謝
1>; sp_plan_dbccdb wxjj
2>; go

Recommended size for dbccdb database is 38MB (data = 36MB, log = 2MB).

No suitable devices for dbccdb in master..sysdevices.

Recommended values for workspace size, cache size and process count are:

dbname                            scan ws    text ws    cache    process count


wxjj                              18448K     4624K      4615K    2

(return status = 0)

菜蝦

收藏

jimhongchen

Jazy, thank you.
I solved my problem after your hint.
bigbug99, you can use following command to increase the number of worker process.

1>; sp_configure "number of worker processes", 1
2>; go
Parameter Name                 Default     Memory Used Config Value Run Value
------------------------------ ----------- ----------- ------------ -----------
number of worker processes               0         176           1            1

(1 row affected)
Configuration option changed. Since the option is static, Adaptive Server must be rebooted in order for the change to take effect.
(return status = 0)
1>;