天闊PC服務器SCO OpenServer 5安裝說明Ultra160 SCSI

sdccf

天闊PC服務器 SCO UNIX openserver 5.0.5 安裝說明-Ultra160 SCSI環境
1、從 www.dawning.com.cn 下載驅動程序
2、更改IDE-CDROM 設置，將CDROM 跳線設為 MASTER，將CDROM IDE線接到 IDE 1 口。
Installing SCO OpenServer 5.0.5
Follow these instructions only if you are installing
SCO OpenServer 5.0.5 for the first time.
Note: Remember that UNIX commands are case sensitive.
Enter the commands exactly as shown in the instructions.
1 Insert the SCO OpenServer 5.0.5 boot disk into the primary
floppy disk drive and turn ON the computer. Alternatively,
insert the SCO OpenServer 5.0.5 boot CD into the primary CD-ROM
drive and turn ON the computer.
2 When you see these prompts:
SCO OpenServer (TM) Release 5 Boot:
Type ahslink and press Enter.
3 Type ad160 as the package you want to link to the system and
press Enter.
4 Insert the requested volume (the Ultra160 Family Manager Set
disk for SCO UNIX) in the floppy disk drive and press Enter.
5 If the driver is properly loaded, the following message appears:
ad160.ad160:Loading module
fd(52)/ad160/driver/ad160/Driver.o text............
ad160: Driver "ad160" successfully loaded.
6 Follow the procedures in your SCO UNIX documentation for
completing the installation.


本文來自ChinaUnix博客，如果查看原文請點：http://blog.chinaunix.net/u/31/showart_509562.html