標題: 更換時鐘板、I/O板或CPU/Mem板后還需要做什么動作 [打印本頁] 作者: 凡俗子 時間: 2008-05-21 08:30 標題: 更換時鐘板、I/O板或CPU/Mem板后還需要做什么動作 更換時鐘板、I/O板和CPU/Mem板后還需要在底層做什么動作作者: 風之幻想 時間: 2008-05-21 11:37
看看板子的firmware是否一致.如果一直.boot -r就可以了。作者: 凡俗子 時間: 2008-05-21 12:22
如果不一致怎么辦，請樓主指點作者: myniker 時間: 2008-05-21 14:25
如果更換了cpu板，firmware版本和其他板子不一直，自檢完起系統(tǒng)之前會有提示版本不一致，命令也會列出來。\r\n\r\nAll system boards within a system must be at the same firmware revision. \r\nWhen replacing a system board, confirm that the firmware version on the replacement matches the other system boards. \r\n\r\nFlash PROM Notes\r\nUse the Flash PROM Programming Utility to update the flash PROM. \r\nUse the prom-copy (src dst -) command to copy a flash PROM.\r\n\r\nok 2 b prom-copy (copies from board 2 to board 11) \r\nUse the update-proms command to synchronize the latest version of flash PROM installed in the system to all boards of the same type.