亚洲av成人无遮挡网站在线观看,少妇性bbb搡bbb爽爽爽,亚洲av日韩精品久久久久久,兔费看少妇性l交大片免费,无码少妇一区二区三区

Chinaunix

標題: M5000 XSCF error [打印本頁]
作者: lem0    時間: 2012-04-13 15:18
標題: M5000 XSCF error
Hi,all

       昨天升級了一臺M5000，原配置如下。
    | MBU_B                                   |       1    |
    |     CPUM                                  |       2    |
    |         Freq:2.150 GHz;             |   (   4)   |
    |     MEMB                                 |       2    |
    |         MEM                                |      16    |
    |             Type:2B; Size:2 GB;   |   (  16)   |

關機，加了兩塊內存板進去（內存板大小及PN都跟原來機器上的一樣）1號和5號 內存槽上，然后接上電源線就反復出現下面的報錯信息

------------------------------

XSCF uboot  01070000  (Feb  8 2008 - 11:12:19)

SCF board boot factor = a080
memory test ..
Memory compare test

memory error detect 80000008, address 00000000 data aaaaaaaa -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000000

memory error detect 80000008, address 00000000 data 55555555 -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000000
.
memory error detect 80000008, address 00000004 data aaaaaaaa -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000004

memory error detect 80000008, address 00000004 data 55555555 -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000004

------------------------------------

最后出現下面提示就停住了，XSCF提示符也沒有出現;

-----------------------------

XSCF uboot  01070000  (Feb  8 2008 - 11:12:19)

SCF board boot factor = 9180
    DDR Real size: 256 MB
    DDR: 224 MB

-----------------------------
估計是XSCF出問題了，有沒有哪位遇到過類似的情況? Thank you !


作者: 東方蜘蛛    時間: 2012-04-13 16:21
打800
作者: doging    時間: 2012-04-16 11:59
拆了新加的內存板，是否正常起動xscf?


原來內存與cpu是在哪個槽位?
作者: yhliu123    時間: 2012-04-16 15:37
關注中
作者: yhliu123    時間: 2012-04-16 16:03
原機器的情況
cpu板槽位：0和2
內存板槽位：0和4

擴內存板時，插的槽位是1和5

接通電源線xscf板就報錯無法初始化，信息如下：
XSCF uboot  01070000  (Feb  8 2008 - 11:12:19)

SCF board boot factor = a080
memory test ..
Memory compare test

memory error detect 80000008, address 00000000 data aaaaaaaa -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000000

memory error detect 80000008, address 00000000 data 55555555 -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000000
。。。。。。

XSCF uboot  01070000  (Feb  8 2008 - 11:12:19)

SCF board boot factor = 9180
    DDR Real size: 256 MB
    DDR: 224 MB

機器就死在這里了。查看機器的日志發現有關于硬件的報錯
XSCF>
XSCF> showlogs error
Date: Oct 02 17:05:11 CST 2008     Code: 40000200-cfffd7ff-0300003200000000
    Status: Information            Occurred: Oct 02 17:05:11.044 CST 2008
    FRU: /HDD#0,/IOU#0
    Msg: Boot process failed
Date: Oct 03 09:10:06 CST 2008     Code: 40000200-d3ffd7ff-0300003203000000
    Status: Information            Occurred: Oct 03 09:10:06.014 CST 2008
    FRU: /DVD,/IOU#0
    Msg: Boot process failed
Date: Oct 03 11:10:08 CST 2008     Code: 40000200-cfffd7ff-0300003200000000
    Status: Information            Occurred: Oct 03 11:10:07.860 CST 2008
    FRU: /HDD#0,/IOU#0
    Msg: Boot process failed
Date: Oct 03 11:16:54 CST 2008     Code: 40000200-cfffd7ff-0300003200000000
    Status: Information            Occurred: Oct 03 11:16:53.976 CST 2008
    FRU: /HDD#2,/IOU#1
    Msg: Boot process failed
Date: Oct 03 11:17:16 CST 2008     Code: 40008000-bb010000-0300003200000000
    Status: Information            Occurred: Oct 03 11:17:16.280 CST 2008
    FRU: /IOU#1
    Msg: Boot process failed
Date: Oct 12 21:16:18 CST 2008     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Oct 12 21:12:37.171 CST 2008
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Oct 13 01:34:45 CST 2008     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Oct 13 01:31:04.097 CST 2008
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Oct 13 13:48:06 CST 2008     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Oct 13 13:43:45.639 CST 2008
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Nov 03 03:53:08 CST 2008     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Nov 03 03:49:30.024 CST 2008
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Nov 12 11:18:16 CST 2008     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Nov 12 11:14:38.955 CST 2008
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Nov 24 22:50:30 CST 2008     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Nov 24 22:46:39.083 CST 2008
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Jan 07 17:32:59 CST 2009     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Jan 07 17:28:28.154 CST 2009
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Jan 07 17:49:48 CST 2009     Code: 60000000-ffffffff-0109001500000000
    Status: Warning                Occurred: Jan 07 17:46:04.727 CST 2009
    FRU: /UNSPECIFIED,/UNSPECIFIED
    Msg: XSCF command: System status change (OS panic) (DID#00, path: 00)
Date: Jul 19 07:44:22 CST 2010     Code: 60000000-feff0000-0104250100000000
    Status: Warning                Occurred: Jul 19 07:44:22.199 CST 2010
    FRU: /ENVIRONMENT
    Msg: High temperature at air inlet
Date: Jun 16 10:48:08 CST 2011     Code: 40000000-c201faff-011d001100000000
    Status: Information            Occurred: Jun 16 10:48:01.370 CST 2011
    FRU: /XSCFU,/FIRMWARE
    Msg: XSCF panic detected
XSCF>
XSCF>

更換了xscf板，初始化可以通過，但發現版本不一樣，

login: default
Change the panel mode switch to Service and press return...
Leave it in that position for at least 5 seconds.  Change the panel mode switch to Locked, and press return...
XCP version of Panel EEPROM and XSCF FMEM mismatched,

        Panel EEPROM=1072, XSCF FMEM=1110

XSCF>
XSCF>
XSCF> version -c xcp -v
XSCF#0 (Active )
XCP0 (Reserve): 1110
OpenBoot PROM : 02.29.0000
XSCF          : 01.11.0000
XCP1 (Current): 1110
OpenBoot PROM : 02.29.0000
XSCF          : 01.11.0000
OpenBoot PROM BACKUP
#0: 02.18.0000
#1: 02.29.0000
XSCF> version -c xcp -v -t
XCP: 1110
OpenBoot PROM : 02.29.0000
XSCF          : 01.11.0000
XSCF>
XSCF>
XSCF>
XSCF>
XSCF> version -c xscf -v
XSCF#0 (Active )
01.11.0000(Reserve) 01.11.0000(Current)
XSCF>
XSCF> flashupdate -c sync    嘗試去同步FM，失敗
Checking the XCP image file, please wait a minute
Error: Version does not exist
XSCF>

請問大家，有沒有好的辦法，在不升級硬件FM的情況下，將xscf降到1072 ？
作者: yhliu123    時間: 2012-04-16 16:08
機器已經出保，原廠不管了，該怎么辦呀？
作者: doging    時間: 2012-04-16 16:25
本帖最后由 doging 于 2012-04-16 16:25 編輯

flashupdate -c sync    這是M8000/9000的命令，M5000肯定會失敗

下載個最新固件，升級一下就好了
作者: yhliu123    時間: 2012-04-16 16:48
非常感謝！請問，你以前也碰見過這樣的問題嗎？

在不升級的情況下，有沒有別的方法可以解決呢？
作者: doging    時間: 2012-04-17 15:22
本帖最后由 doging 于 2012-04-17 15:23 編輯

沒碰到過，不過從報錯看，是sxcf卡自檢內存的時失�。�

如果你有環境可以搗鼓，可以檢查一下sxcf卡上面是否有dimm條了，重新插拔一下說不定就好了


SCF board boot factor = a080
memory test ..
Memory compare test

memory error detect 80000008, address 00000000 data aaaaaaaa -> deadbeef
capture_data hi deadbeef lo deadbeef ecc ffff
capture_attributes 01113001 address 00000000

作者: znnnz    時間: 2012-04-27 10:35
是不是需要升級FW呢？
作者: yulemi    時間: 2012-09-19 23:20
關注最后的結果
作者: killer911    時間: 2012-09-20 09:47
XSCF硬件問題,換吧,呵呵
作者: kwtip    時間: 2012-09-20 09:53
M的機器加內存要內存PN號是一樣的，A組內存PN要一樣，B組的內存PN也要一樣，A組的PN和B組的PN可以不一樣，但B組的內存好像不能大于A組，我記不太清楚了，反正插一摸一樣的內存肯定不會有問題。



歡迎光臨 Chinaunix (http://72891.cn/) Powered by Discuz! X3.2