標題: 求助SUN V880的報錯的解決方法 [打印本頁] 作者: 霹將912 時間: 2011-08-03 13:51 標題: 求助SUN V880的報錯的解決方法 SUN V880在進行串口檢測能正常去到OK正常狀態下，probe-scsi能認到硬盤，然后進行boot cdrom -s去到輸入FORMAT就認不到硬盤了
提示# SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in
整個過程如下：
{2} ok probe-scsi
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 500000e010b75511 FUJITSU MAP3735F SUN72G 1501
6 6 0 5080020000180411 SUNW SUNWGS INT FCBPL922A
{2} ok boot cdrom -s
Boot device: /pci@8,700000/scsi@1/disk@6,0:f File and args: -s
SunOS Release 5.10 Version Generic_137137-09 64-bit
Copyright 1983-2008 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
WARNING: pcisch1: ino 0x4 blocked鼴ooting to milestone "milestone/single-user:default".
WARNING: pcisch1:pci@8,600000: ib_intr_dist(29ebf9bf020,204) timeout
Configuring devices.
Using RPC Bootparams for network configuration information.
Attempting to configure interface eri0...
Skipped interface eri0
Attempting to configure interface ge0...
SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in.
Skipped interface ge0
Requesting System Maintenance Mode
SINGLE USER MODE
# format
Searching for disks...done
No disks found!
# SUNW,pci-gem0: Could not Establish Link -- Check if the cable is plugged in.作者: taojie2000 時間: 2011-08-03 14:09 回復 1#霹將912